oscillating RMS ?
Hi,
if the RMS values on the solver oscillate (hold around a value),what could be the cause ;poor mesh quality or simply a large timestep ,or both ? thanks |
Re: oscillating RMS ?
Please see the following link in this forum's FAQ for advice:
http://www.cfd-online.com/Wiki/Ansys...gence_criteria Good luck. Andy |
Re: oscillating RMS ?
I had a similar problem although it was with energy balances. Refining the mesh and using double precision made a huge difference.
|
All times are GMT -4. The time now is 13:26. |