|
[Sponsors] |
April 18, 2008, 05:24 |
Water impingment
|
#1 |
Guest
Posts: n/a
|
Hello!
I would like to know how to simulate the water impingment on a wall by the use of the Restitution Coefficient for particles (parallel and perpendicular coefficient) and the difference between those two and the Mass flow absorption coefficient. Thanks in advance for your answers Elisabetta |
|
April 20, 2008, 18:33 |
Re: Water impingment
|
#2 |
Guest
Posts: n/a
|
Hi,
Look at tutorial 9, flow through a butterfly valve. Glenn Horrocks |
|
April 21, 2008, 04:38 |
Re: Water impingment
|
#3 |
Guest
Posts: n/a
|
Thanks a lot!
Elisabetta |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Water vapour condensation in CFX-5.7.1 | hdj | CFX | 1 | November 27, 2005 07:15 |
Separation phenomenon of water, droplet and air | Raymond | CFX | 0 | July 9, 2004 22:59 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |
uptodate water distribution network | fredius,magige,tanzanian,(e.a) | Main CFD Forum | 0 | January 27, 2002 07:10 |