CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

pressure is not rising in compression stroke..

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2008, 04:13
Default pressure is not rising in compression stroke..
  #1
chetan
Guest
 
Posts: n/a
i'm simulating the compression stroke of ic engine in CFX 11. at the end of suction stroke the mass in the cylinder was around 11 mg. but i'm getting pressure only 22 bar at the end of compression stroke. experimentaly it is around 32 bar. in CFX 10 for the same case it came around 36 bar. why the pressure is not rising in CFX 11???
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
pressure BC-natural convection engahmed Main CFD Forum 0 June 16, 2010 12:38
Pressure rising with temperature Koranten FLUENT 0 August 19, 2009 06:57
Setting pressure and velocity in inlet Asghari FLUENT 5 September 22, 2006 14:23
compression stroke in piston engine Hassaneen Siemens 12 December 29, 2000 13:30


All times are GMT -4. The time now is 08:11.