ICEM-CFD Geometry Export

June 20, 2008, 09:49

Hi, I have a mesh, from wich I generated a geometry through mesh->facets with ICEM-CFD. Now I need to export this geometry, and it doesn't work, not with IGES nor with Parasolid. That is, some simpler surfaces do get exported, but most are just ignored. Is there another way to export this geometry to Design Modeler/ Ansys? I can generate the mesh in most formats if necessary. I tried also redoing the surfaces from parametrized curves (instead of mesh curves), to no avail. Thanks,

Francois

June 22, 2008, 14:33

which software are you using to view your converted CAD faces. I had used ANSA , and it had no problem in my case except that it took lots of time to read such file from ICEMCFD

June 30, 2008, 11:25

I hope you need to look into other options rather than icemcfd because it is not meant for that, and it will not give a good export mostly..

na_white_tiger · September 7, 2012, 09:18

I got the same problem too. I tried to export a geometry and some surfaces got filtered out. I don't know the reason up till now. Maybe, we have to find out how to turn off this filter things.

ghorrocks · September 8, 2012, 07:19

I repeat the previous posts in the thread - ICEM is not good for geometry modelling. The only reason you should be adding geometry in ICEM is just to help meshing. There should be no need to export geometry from ICEM.

Why do you want to export geometry from ICEM?

na_white_tiger · September 9, 2012, 04:54

Actually, I first started meshing in ICEM. Now I have to start over in Ansys Workbench, which means using Design Modeller to modify the geometry and Meshing to mesh. I only have 1 .tin file of the geometry that I want to mesh and Design Modeller can not read it. That's why I want to use ICEM to export this geometry into .iges or igs which DM can read. If you know other way to convert the geometry file .tin to .iges/.igs which is less troublesome, please let me know. Thank you very much.

fluidflow · September 9, 2012, 15:17

i use icem for modeling and meshing 2D geometry and i think it dose not have any problem
if your geomety is 2D so tell me what is it i mesh airfoil and cavity with icem

na_white_tiger · September 9, 2012, 16:22

@fluidflow: I have a complicate 3D geometry

June 20, 2008, 09:49	ICEM-CFD Geometry Export	#1
Francois Guest Posts: n/a	Hi, I have a mesh, from wich I generated a geometry through mesh->facets with ICEM-CFD. Now I need to export this geometry, and it doesn't work, not with IGES nor with Parasolid. That is, some simpler surfaces do get exported, but most are just ignored. Is there another way to export this geometry to Design Modeler/ Ansys? I can generate the mesh in most formats if necessary. I tried also redoing the surfaces from parametrized curves (instead of mesh curves), to no avail. Thanks, Francois

June 22, 2008, 14:33	Re: ICEM-CFD Geometry Export	#2
Pratik Mehta Guest Posts: n/a	which software are you using to view your converted CAD faces. I had used ANSA , and it had no problem in my case except that it took lots of time to read such file from ICEMCFD

June 30, 2008, 11:25	Re: ICEM-CFD Geometry Export	#3
rohit Guest Posts: n/a	I hope you need to look into other options rather than icemcfd because it is not meant for that, and it will not give a good export mostly..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dimension conflict between icem cfd and fluent	highhopes	ANSYS Meshing & Geometry	1	September 9, 2011 11:07
Importing Solidworks part into ICEM CFD	MetalSupremacist	FLUENT	0	October 8, 2010 17:46
Replace the geometry for an existing mesh in ICEM CFD	Suzzn	ANSYS Meshing & Geometry	2	September 7, 2009 17:59
icem cfd geometry tin file not opening cfx 10 c	mayur	CFX	2	July 10, 2007 02:57
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10

September 7, 2012, 09:18		#4
na_white_tiger New Member Join Date: Sep 2012 Posts: 3 Rep Power: 13	I got the same problem too. I tried to export a geometry and some surfaces got filtered out. I don't know the reason up till now. Maybe, we have to find out how to turn off this filter things.

September 8, 2012, 07:19		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	I repeat the previous posts in the thread - ICEM is not good for geometry modelling. The only reason you should be adding geometry in ICEM is just to help meshing. There should be no need to export geometry from ICEM. Why do you want to export geometry from ICEM?

September 9, 2012, 04:54		#6
na_white_tiger New Member Join Date: Sep 2012 Posts: 3 Rep Power: 13	Actually, I first started meshing in ICEM. Now I have to start over in Ansys Workbench, which means using Design Modeller to modify the geometry and Meshing to mesh. I only have 1 .tin file of the geometry that I want to mesh and Design Modeller can not read it. That's why I want to use ICEM to export this geometry into .iges or igs which DM can read. If you know other way to convert the geometry file .tin to .iges/.igs which is less troublesome, please let me know. Thank you very much.

September 9, 2012, 15:17	hi	#7
fluidflow New Member meysam Join Date: Sep 2012 Posts: 5 Rep Power: 13	i use icem for modeling and meshing 2D geometry and i think it dose not have any problem if your geomety is 2D so tell me what is it i mesh airfoil and cavity with icem

September 9, 2012, 16:22		#8
na_white_tiger New Member Join Date: Sep 2012 Posts: 3 Rep Power: 13	@fluidflow: I have a complicate 3D geometry