CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

[CFX Post] : Wireframe, ...

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 27, 2008, 04:36
Default [CFX Post] : Wireframe, ...
  #1
Hervé
Guest
 
Posts: n/a
Hi, I have a geometry divided in 7 domains. My simulation converged well in CFX-Solver.

When I want to load the .res file in CFX-Post, I get the following :

- If I choose to load all the domains, I get nothing... No wireframe, .... I can't plot streamlines, ... When I want to use "Turbo", only the first four domains are available. There is no sign of the last 3 ones.

- If I choose to load only the first four domains then it worked well...

Any ideas why I get such a behaviour. What could be wrong with the last three domains ?

Regards,

Hervé
  Reply With Quote

Old   June 27, 2008, 12:33
Default Re: [CFX Post] : Wireframe, ...
  #2
Amit Roghs
Guest
 
Posts: n/a
Dear pal,

In Turbo mode you can only visualize those components which are pertaining to Turbomachinery blades.

For example in a Francis Turbine, you can only visualize guidevanes & runner. Its not possible to the see casing & draft tube.

Also you can only initialize blade components, after initializing you will be seeing a fan like logo at those components which the turbo can identify & the rest will be in red colour.

I hope I have understood your problem correctly.

Regards,

Amit Roghs

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit-how to create a wireframe face from so many edges? gholamghar ANSYS 0 February 18, 2011 08:22
[OpenFOAM] wireframe as solid rcastilla ParaView 3 April 3, 2009 19:09
Gambit: Face from wireframe problem smillerhh FLUENT 0 September 29, 2006 03:54
mismatch between the wireframe and surface data Richard CFX 0 March 9, 2006 01:15
creating real face from a wireframe Nicklas FLUENT 2 October 11, 2004 09:05


All times are GMT -4. The time now is 16:28.