CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

mold filling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 9, 2008, 10:19
Default mold filling
  #1
John
Guest
 
Posts: n/a
I am simulating a mold filling, with thermal energy model.

I need some help on temperature modeling.

i put some equation on CEL and put that equation on inlet conditions but no result i can see. because i only see the initial value for domain. Any clue?

sorry for my english
  Reply With Quote

Old   October 9, 2008, 19:46
Default Re: mold filling
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Rui is a regular on this forum and his thesis used CFX to model filling a cavity with resin. Do a search on the forum for some of his posts. He has also got a link somewhere to his thesis.

Glenn Horrocks
  Reply With Quote

Old   October 14, 2008, 12:03
Default Re: mold filling
  #3
John
Guest
 
Posts: n/a
i did some search and dont find any thing about it.

I saw his thesis and i have a question about how to simulate the Temperature. I saw that Rui uses a Thermal Equation Energy. To determine the Temperature, the Rui implement an equation for Temperature at CCL?

And how the filling stage are separate from the thermal stage?What i mean, is how the equations ar resolver first and second the other?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to track/view the filling of resin inside a mold using viscid/laminar modelFluent gtuncol FLUENT 0 August 7, 2010 00:49
Mold Filling simulation using VOF model. Nitin Pathak FLUENT 1 August 21, 2009 12:54
MoLd Filling AMP FLUENT 0 April 2, 2008 00:49
Regarding mold filling simulation in Fluent Nitin Pathak FLUENT 0 August 10, 2007 15:19
mold filling in Fluent ? Tony FLUENT 0 April 8, 2002 22:24


All times are GMT -4. The time now is 08:31.