CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

yplus at high Re

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 3, 2008, 08:21
Default yplus at high Re
  #1
Sachin
Guest
 
Posts: n/a
I am dealing with a high pressure(250 bar, 600-800K temp) supercritical water flow through a channel. i want to know, what will be the range of y plus at Re(50000 to 70000). thanks
  Reply With Quote

Old   November 3, 2008, 14:05
Default Re: yplus at high Re
  #2
John S.
Guest
 
Posts: n/a
Y+ is grid dependent.
  Reply With Quote

Old   November 3, 2008, 15:01
Default Re: yplus at high Re
  #3
sachin
Guest
 
Posts: n/a
in my case, mesh is corse with boundary layers not much refinement at the wall. using k-epsilon model with scalable wall functions. after postprocessing the results i got yplus in the range of 2000 to 2500. i dont know it is correct or not. local Re is in the range of 50000 to 70000
  Reply With Quote

Old   November 3, 2008, 17:42
Default Re: yplus at high Re
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Do a mesh sensitivity check to determine if this y+ value is OK.

Glenn Horrocks
  Reply With Quote

Old   November 4, 2008, 07:39
Default Re: yplus at high Re
  #5
sachin
Guest
 
Posts: n/a
thanks glenn and john
  Reply With Quote

Old   November 11, 2008, 10:44
Default Re: yplus at high Re
  #6
pratik mehta
Guest
 
Posts: n/a
I think you really need to make hybrid mesh . It seems from your values of Y plus, you don`t have one, any ways try to get a bit closer to the wall, determine your first cell height some iterative procedure,

I am sure you will get good results
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to understand high resolution scheme and high order scheme iilw1314 Main CFD Forum 7 April 12, 2022 13:29
which yplus (SST) sanchezz CFX 17 January 11, 2010 05:45
High Aspect Ratio elements Flavio CFX 2 November 24, 2006 13:01
Multicomponent fluid Andrea CFX 2 October 11, 2004 06:12
heat transfer coefficients with "bad" yplus Andrew Main CFD Forum 4 April 8, 1999 05:43


All times are GMT -4. The time now is 01:09.