CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

interplote data from post file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 13, 2008, 13:11
Default interplote data from post file
  #1
Kishan Patel
Guest
 
Posts: n/a
hi there,

i am trying to simulate the pipe with fluid entering with high temp. and because of conductive material it will going to loss heat and becoming cool. for this first i simulate only fluid part. In next stage i want to simulate solid pipe part which is some conductive material. From the result file of fluid part i got the data of temperature at wall. this temperature data at wall, i have to give at inner surface of solid pipe in ansys pre. so how can i do that?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 18:51
Results saving in CFD hawk Main CFD Forum 16 July 21, 2005 21:51


All times are GMT -4. The time now is 06:24.