CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Output tot. press. each iteration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 17, 2008, 07:26
Default Output tot. press. each iteration
  #1
Ianto
Guest
 
Posts: n/a
Hello All,

Could anyone advise how to output the value of total pressure on my outlet for each iteration in order to evaluate convergence?

I'm looking at the monitors tab in pre but can't see a way of doing it.

Thanks,

Ianto
  Reply With Quote

Old   December 17, 2008, 07:38
Default Re: Output tot. press. each iteration
  #2
Timon
Guest
 
Posts: n/a
You have to change the option-field to "expression". Then you can enter a CEL-expression for the total pressure at your outlet, eg. massFlowAve(Total Pressure)@Outlet.
  Reply With Quote

Old   December 17, 2008, 07:55
Default Re: Output tot. press. each iteration
  #3
Ianto
Guest
 
Posts: n/a
Thanks Timon!

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh aborting Tobi OpenFOAM Meshing & Mesh Conversion 0 November 10, 2010 04:23
lift and drag on ship superstructures vaina74 OpenFOAM Running, Solving & CFD 3 June 8, 2010 13:30
Parallel runs slower with MTU=9000 than MTU=1500 Javier Larrondo FLUENT 0 October 28, 2007 23:30
[Other] Output Format of MetaMesh t42 OpenFOAM Meshing & Mesh Conversion 0 August 3, 2007 05:28
Heat exchanger problem chiseung FLUENT 16 October 20, 2001 05:36


All times are GMT -4. The time now is 04:26.