CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > CFX

Create a surface inside a volume

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 4, 2009, 11:00
Default Create a surface inside a volume
Posts: n/a
Hi all

I am trying to make some simplifacatiions on modelling many persons inside a room and would therefore like to model all persons as a surface without any thickness inside a solid enclosure. Is this possible and how to do it?

Kind regards MAT
  Reply With Quote

Old   February 4, 2009, 17:42
Default Re: Create a surface inside a volume
Glenn Horrocks
Posts: n/a

You can either specify a heat flux on an external surface or you can specify a thin surface inside the domain and specify a heat flux on that.

Glenn Horrocks
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Actuator disk model audrich FLUENT 0 September 21, 2009 08:06
Zero Volume Fraction in Free Surface Problem marega CFX 1 September 10, 2009 07:31
Solidworks, inside volume AdidaKK Main CFD Forum 7 August 12, 2009 16:37
Surface and Volume Integrals philippe FLUENT 5 June 22, 2005 02:00
meshing F1 front wing Steve FLUENT 0 April 17, 2003 13:37

All times are GMT -4. The time now is 11:38.