CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

how to convert 3d results in 2D results

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 17, 2009, 18:48
Default how to convert 3d results in 2D results
  #1
Ben
Guest
 
Posts: n/a
I am modeling a 2D problem. I set the mesh in Z direction just one layer and the two surfaces in Z plane as symmetric. After simulation, How can I convent the wall Shear stress in 3D case into real 2D case?

PS: How can I plot the relationship about wall shear stress on a curve VS Angle?
  Reply With Quote

Old   February 18, 2009, 17:42
Default Re: how to convert 3d results in 2D results
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Wall shear stress is meaningful in 2D and 3D as stress is force per unit area. There is no conversion necessary.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OpenFOAM - Validation of Results Ahmed OpenFOAM Running, Solving & CFD 10 May 13, 2018 19:28
wind tunnel results vs fluent pixie Main CFD Forum 1 August 20, 2009 09:02
Velocity spots in openFoam results Valle OpenFOAM Running, Solving & CFD 4 August 19, 2009 06:53
How to plot a function over a time period? Cirion0000 CFX 4 July 18, 2009 13:48
CFX cylinder or sphere benchmark results Mel CFX 1 August 8, 2005 19:47


All times are GMT -4. The time now is 05:09.