CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

HVAC Simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 10, 2009, 18:57
Default HVAC Simulation
  #1
David
Guest
 
Posts: n/a
I have successfully set up and run a simulation similar to tutorial 17 in CFX. The simulation is a room with air inlets and outlets, but no internal heat generation. I want to place cylinders inside of the room space and give them a heat flux value to simulate people in the room.

I have imported a separate mesh of 28 cylinders, each 5 feet high with 2 foot diameter, and place it inside of the room. I place the cylinders in a subdomain with a radiation source associated with the subdomain. Also I defined the cylinders with the boundary conditions of a wall with a set temperature of 90 degrees.

When I run the simulation I get a "Isolated fluid regions" error. It remarks that the isolated regions do not have the pressure level set. Possibly because the domain interface was not properly defined.

Any advice on how to set up the simulation better or to fix my error would be greatly appreciated. Thanks and have a great day.
  Reply With Quote

Old   March 10, 2009, 23:36
Default Re: HVAC Simulation
  #2
Rikio
Guest
 
Posts: n/a
David,

The cylinders should be set as solid domain, not subdomain of fluid. I think this can fix your problem.

Rikio
  Reply With Quote

Old   March 11, 2009, 16:46
Default Re: HVAC Simulation
  #3
David
Guest
 
Posts: n/a
Thank you very much. This seems to have solver the problem.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
velocity profile export from a simulation onto another sudhirlv STAR-CCM+ 1 September 12, 2010 19:57
HVAC Simulation. Urgent !! Boris FLUENT 5 October 25, 2009 11:21
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 23:07.