CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

FSI in micropump analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 7, 2009, 10:45
Default FSI in micropump analysis
  #1
Amin Kolahdouz
Guest
 
Posts: n/a
Hi,I am dealing with a FSI problem(micropump) including piezoelecric analysis(ANSYS) and microfluid simulation(CFX). But my problem is that the more I increase the frequency of applied voltage, the more flow rate is attained which is not true. Because a maximum flow rate should exist near the resonance frequency of system.I changed the working fluid from water to air but unexpectedly the deflection mplitude of diaphragm was the same as water! It shows the solution of ANSYS and CFX were maybe independent!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FSI help Fluent-Structural Analysis nikupasca FLUENT 13 September 2, 2017 07:00
FSI Transient Thermal Analysis Abduri CFX 1 January 1, 2017 23:54
Need help on FSI analysis and Re-meshing Approach khinthida2005 CFX 5 September 4, 2009 08:56
Properly using symmetry with both CFX and ANSYS workbench for a FSI analysis, help! Cirion0000 CFX 0 July 6, 2009 15:26
FSI analysis berger Sebastien CFX 0 May 3, 2005 08:50


All times are GMT -4. The time now is 01:05.