CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

ICEM CFD 5.0 - 2D to 3D Mesh Extrude

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By James Date

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 11, 2004, 13:06
Default ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #1
James Date
Guest
 
Posts: n/a
Hi

I'm new to using ICEM and am having problems turning a 2D mesh into 3D mesh for export into CFX 5.7.

Basically, I've created a 2D mesh around an aerofoil with parts assigned to the curves which describe the boundary conditions i.e. the curve around the aerofoil is called "wall" and the curve in the upstream is called "inlet" etc.

I can generate the 2D mesh fine for my geometry. I save the hex.uns file.

When i use the "extrude mesh" command a 3D mesh is created. However, when i read the mesh into CFX, rather than each of the new faces (produced from 2D curves) having the same part names as their corresponding 2D edge, they are all assigned to one face name/part/boundary condition.

I'm sure I'm doing something silly!

Regards James
KotuZahn likes this.
  Reply With Quote

Old   August 11, 2004, 19:34
Default Re: ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi James,

You have to manually move the shell elements at each face to the respective Part groupings. You have to turn the geometry features in the display tree off to be able to select the element features.

Glenn Horrocks
  Reply With Quote

Old   August 12, 2004, 01:30
Default Re: ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #3
deLuther
Guest
 
Posts: n/a
Or, instead of modify element family, you can simply switch on bar elements(Lines)(these elements will be created if you have edges associated to curves). Then you select all elements and leave New side part name as inherited. Then everything will be alright.

deLuther
  Reply With Quote

Old   August 12, 2004, 14:37
Default Re: ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #4
James Date
Guest
 
Posts: n/a
Cheers guys

Both your suggestions worked fine and i managed to produce the 3D mesh from the 2D one.

One further question though: How do you delete the 3D mesh and subsequent parts if you make an error, without re-reading the .tin and .blk files.

I have found deleting parts practically impossible so far (the manual does not explain this either). Any suggestions.

Regards James
  Reply With Quote

Old   August 12, 2004, 19:43
Default Re: ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #5
Glenn Horrocks
Guest
 
Posts: n/a
Hi James,

To delete a part, delete all the geometry and mesh objects contained in the part, and right click on the part in the tree. Select "Delete empty parts" and it will magically disappear, along with any other empty parts.

Glenn
  Reply With Quote

Old   October 20, 2013, 04:39
Default Re: ICEM CFD 5.0 - 2D to 3D Mesh Extrude
  #6
New Member
 
Akshay Khadse
Join Date: Sep 2013
Posts: 11
Rep Power: 12
Ammofreak is on a distinguished road
Can anyone please tell me how to switch on the bar elements?
Ammofreak is offline   Reply With Quote

Old   October 20, 2013, 20:54
Default
  #7
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Talk about raising the dead. This thread is 9 years old. But I am still here

You have to generate the bar elements either from the edges of existing elements or from new points. CFX cannot use bar elements so the only reason you would do this is to generate surface then volume elements.
ghorrocks is offline   Reply With Quote

Old   October 22, 2013, 04:46
Default thanks
  #8
New Member
 
Akshay Khadse
Join Date: Sep 2013
Posts: 11
Rep Power: 12
Ammofreak is on a distinguished road
Thanks Glenn, I am now able to make bar elements for extrusion of mesh.
Ammofreak is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
How to import mesh from icem cfd to star cd jopawipr STAR-CD 4 November 9, 2012 16:18
Icem CFD mesh grading issue joegi.geo ANSYS Meshing & Geometry 7 March 8, 2011 19:26
ICEM CFD to CFX geometry and mesh Luca CFX 6 February 4, 2010 17:31
How is ICEM CFD mesh file format? Seth CFX 4 March 2, 2008 18:22


All times are GMT -4. The time now is 04:36.