 |
 |
 |
|
|
|
[Sponsors] | ||||
Errorin subroutine appeared when applying cavitation model |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 13, 2009, 20:31
|
Errorin subroutine appeared when applying cavitation model
|
#1 |
|
New Member
Piti
Join Date: Mar 2009
Posts: 7
Rep Power: 18  |
I tried to use cavitation model in my simulation. I had steam5l and steam5v in my fluids list. I also had steam5vl as a HBM in my material list because of the cavitation model. When I started the run, the following message appeared:
Error in subroutine IAPWS_NAMES : Could not find property in name listsfor IAPWS property DENSITYNC GETVAR originally called by subroutine CAL_GVar MFLO_ ---------------------------------- Error in subroutine IAPWS_MAIN : Unknown property name DENSITYNC for IAPWS steam database. GETVAR originally called by subroutine CAL_GVar MFLO_ ---------------------------------- Error in subroutine MK_TABLE_EXP : Error in explicit table build for property DENSITYNC GETVAR originally called by subroutine CAL_GVar Can anyone please explain me why this happened? and how to solve this problem? Thanks |
|
|
|
|
|
July 2, 2012, 04:36
|
|
#2 |
|
New Member
wpyao
Join Date: Dec 2011
Posts: 1
Rep Power: 0 |
i get the same problem , so have you solved it?
|
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mixture model for cavitation | mech5190 | FLUENT | 12 | December 7, 2016 04:24 |
| Cavitation model example, anyone? | pitisrisuk | CFX | 2 | April 2, 2009 21:12 |
| convergence problem with FLUENT cavitation model | Belete Kiflie | FLUENT | 3 | February 20, 2006 11:16 |
| applying results as b.c on some other model | manohar | FLUENT | 3 | October 10, 2005 08:03 |
| applying post data as b.c on some other model | manohar | Siemens | 3 | October 10, 2005 07:38 |
Linear Mode
