How to create airfoil structure in DesignModeler

November 28, 2005, 17:46

Is there any way to create a airfoil structure using DesignModeler.I heard we can input the required parameter in excel spreadsheet first.Any tutorial on that? Please help. Any suggestion is welcome.

Jiuan · March 16, 2009, 13:12

In the following link, you can find cooridinate of the vertices for the airfoil. Hope it can help.

John · March 20, 2009, 19:37

Quote:

Originally Posted by Jiuan

In the following link, you can find cooridinate of the vertices for the airfoil. Hope it can help.

Link?

I would rather generate airfoil type of gemetries in solidedge or solidworks. Designmodeler is better for simple geometry or for cleaning up geometry.

sivarama1 · April 24, 2009, 05:29

Hi, everyone:

Can I use the Turbogrid to mesh the flow field of a wind turbine blade?

I know the Turbogrid and ICEM can mesh an internal flow turbomachine easily such as gas turbine and water turbine. But I'm not sure whether it can mesh an external flow rotor like wind turbine. Does anyone has some experience and give me some advice?

Thank you!

November 28, 2005, 17:46	How to create airfoil structure in DesignModeler	#1
Richard Guest Posts: n/a	Is there any way to create a airfoil structure using DesignModeler.I heard we can input the required parameter in excel spreadsheet first.Any tutorial on that? Please help. Any suggestion is welcome.

April 24, 2009, 05:29	wind rotor blade simulation	#4
sivarama1 Member sivaramakrishnaiah Join Date: Mar 2009 Location: india,pondicherry Posts: 76 Rep Power: 17	Hi, everyone: Can I use the Turbogrid to mesh the flow field of a wind turbine blade? I know the Turbogrid and ICEM can mesh an internal flow turbomachine easily such as gas turbine and water turbine. But I'm not sure whether it can mesh an external flow rotor like wind turbine. Does anyone has some experience and give me some advice? Thank you! __________________ sivaramakrihnaiah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Low Speed Airfoil	Mancusi	FLUENT	7	April 3, 2014 06:11
New OpenFOAM Forum Structure	jola	OpenFOAM	2	October 19, 2011 06:55
[Commercial meshers] Handling cyclic BC from gambit to openfoam for a cascade airfoil problem - OF 1.6	maverick	OpenFOAM Meshing & Mesh Conversion	2	June 18, 2011 04:36
[ICEM] Can’t get 2D Blayer in hex mesh to be accurate O-block around airfoil	josip76	ANSYS Meshing & Geometry	2	June 4, 2011 18:03
Airfoil boundary condition	Frank	Main CFD Forum	1	April 21, 2008 18:36

March 16, 2009, 13:12		#2
Jiuan Member Dongzi Wei Join Date: Mar 2009 Posts: 33 Rep Power: 17	In the following link, you can find cooridinate of the vertices for the airfoil. Hope it can help.