Which trailing edge is correct for meshing of aerofoils for CFX -- CFD Online Discussion Forums

May 10, 2009, 12:45	Which trailing edge is correct for meshing of aerofoils for CFX	#1
LSC Member LSC Join Date: May 2009 Posts: 58 Rep Power: 16	pls shed some light as to which trailing edge should I use during meshing. I need to run the simulations in CFX. I encountered problem sweeping for the case with a common vertex for Upper and Lower surface at the trailing edge. The error message goes like this: "Error: ACIS error 95034: Attempt to sweep a non-manifold face". Previously I have no problem sweeping for the case of a finite thickness at the Trailing edge. Trailing edge with common vertex. Finite Thickness at trailing edge Please advice..

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
The trailing edge velocity	maximus	Main CFD Forum	0	March 6, 2005 00:27
Aerofoils/blades with rounded trailing edge.	Sergei Chernyshenko	Main CFD Forum	6	July 26, 2000 05:10
trailing edge problem	Kuo Wei-Jen	Main CFD Forum	2	April 14, 1999 10:09

All times are GMT -4. The time now is 07:22.