CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

partially filled tank under acceleration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 8, 2009, 21:40
Default partially filled tank under acceleration
  #1
New Member
 
ETS Motorsport
Join Date: Jun 2009
Posts: 2
Rep Power: 0
Jean-Gabriel is on a distinguished road
Hi, I'm not used to ansys CFX or Fluent but can someone help me with the next question.
As part of formula SAE team from ETS motorsport, we had an issue with the fuel tank in high speed cornering (1.5 to 1.8 g's) has a consequence the engine shut.

So, I would like to do CFD analysis to optimize the amount of fuel needed to ensure engine runnng under g's.

"How can i simulate a solid tank partially filled with fuel and air(under pressure 45PSI) in a acceleration state"

I don't need any animation only steady state result.

Thanks a lot as a new member of this forum I will post again for further information on CFX.
Jean-Gabriel is offline   Reply With Quote

Old   June 9, 2009, 05:07
Default
  #2
Rui
Member
 
Rui's Avatar
 
Rui Igreja
Join Date: Mar 2009
Location: Aveiro
Posts: 68
Blog Entries: 1
Rep Power: 17
Rui is on a distinguished road
That's a hydrostatic problem, isn't it?
__________________
Rui
Rui is offline   Reply With Quote

Old   June 9, 2009, 07:57
Default
  #3
Senior Member
 
Join Date: Apr 2009
Posts: 531
Rep Power: 20
stumpy is on a distinguished road
I would just use a rotating reference frame - so you're simulating the car going around a circle. The rotation rate and the distance of the rotation axis from the tank will determine the g-force applied. Since both air and fuel are present it will be a free surface problem - see the "flow over bump" tutorial for how to set this up. make sure you use "Air ideal gas" as the material for the air phase, since the air will compress at 45 psi. Use a Reference Pressure of 45 psi. Use expressions to set the initial conditions for air/fuel volume fraction.
Mike
stumpy is offline   Reply With Quote

Old   June 9, 2009, 08:20
Default
  #4
Rui
Member
 
Rui's Avatar
 
Rui Igreja
Join Date: Mar 2009
Location: Aveiro
Posts: 68
Blog Entries: 1
Rep Power: 17
Rui is on a distinguished road
Still . . .
Quote:
Originally Posted by Rui View Post
That's a hydrostatic problem, isn't it?
__________________
Rui
Rui is offline   Reply With Quote

Old   June 9, 2009, 09:07
Default
  #5
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Hi,

Yes Rui, if all he wants is the steady state result then I can't see why you need CFD at all - just draw a plane which is perpendicular to the acceleration vector enclosing the volume of fuel. No CFD needed. See, I just saved you a few weeks worth of simulation.

But on the other hand there is NO WAY that a steady state surface will represent anything like what fuel in a tank in a race car wizzing around at 1.5g's is going to do. Here's a little experiment - fill a glass with water, give it a little push from the side and what happens? The surface rocks back and forth, maybe it spills over the top, maybe the flow forms breaking waves. You are kidding yourself if you think you can get anything meaningful with a steady state simulation.

If you are looking for a challenging CFD topic then do a transient CFD analysis of fuel sloshing in a tank. Unless you are an experienced CFD person with free surface modelling experience I guarantee it will take you several months before you get anything close to reality.

If you are looking to help your FSAE team design a better fuel tank than forget CFD and go to the library and look for some fuel tank design textbooks. You won't need CFD to come up with a better design.

Glenn Horrocks
ghorrocks is offline   Reply With Quote

Old   June 9, 2009, 09:55
Default Thanks
  #6
New Member
 
ETS Motorsport
Join Date: Jun 2009
Posts: 2
Rep Power: 0
Jean-Gabriel is on a distinguished road
Thanks guys, the only reason why I would like to use the CFD simulation was because of the complexe geometry of the fuel tank. But, I don't have a month to spend in CFD simulation and so i will try theoritical calculation over a representative simpler geometry.

thanks again for the help
Jean-Gabriel is offline   Reply With Quote

Old   June 9, 2009, 19:29
Default
  #7
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Hi,

Complex geometry in the fuel tank? Sounds easy for a solid modelling package.

Glenn Horrocks
ghorrocks is offline   Reply With Quote

Reply

Tags
acceleration, formula, partially filled, steady state, tank

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
partially filled tank, evaporation at liq-vap. prasanth FLUENT 5 July 24, 2013 18:12
partially filled fuel tank Deniz Boyacı FLUENT 0 March 9, 2009 03:03
Settling tank John Grimm FLUENT 1 March 20, 2005 09:20
tank leakage H FLUENT 0 October 4, 2004 21:28
injection of fuel into tank filled with fuel mujahid FLUENT 1 February 19, 2004 07:36


All times are GMT -4. The time now is 12:23.