 |
 |
 |
|
|
|
[Sponsors] | ||||
June 21, 2009, 06:11
|
Turbulence Model L.E.S
|
#1 |
|
Member
Hamoudi djamel
Join Date: Apr 2009
Posts: 50
Rep Power: 17  |
Good Moning Everybody,
Please if every one can answer me, i am doing a simulation in 2D Can i use L.E.S as a turbulence Model in 2D simulation because L.E.S turbulence model is very robust Thank you in advance |
|
|
|
|
|
June 21, 2009, 07:52
|
|
#2 |
|
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
Hi,
You cannot run LES in 2D. LES requires at least part of the turbulence energy cascade to be modelled and this is an inherently 3D process, even in a 2D geometry. If you want to run in 2D you need a RANS turbulence model. Glenn Horrocks |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SimpleFoam case with SpalartAllmaras turbulence model implemented | nedved | OpenFOAM Running, Solving & CFD | 2 | November 30, 2014 22:43 |
| Eul-Eul flow, k-e-kp-ep-Theta Turbulence model | us | FLUENT | 5 | April 5, 2011 02:29 |
| KOmega Turbulence model from wwwopenFOAMWikinet | philippose | OpenFOAM Running, Solving & CFD | 30 | August 4, 2010 10:26 |
| validating turbulence model on flow around a car | Pedro | CFX | 1 | February 20, 2008 16:32 |
| SSG Reynolds Turbulence Model | Georges | CFX | 1 | February 28, 2007 16:15 |
Linear Mode
