2D fluidized bed mesh and definition files

amscosta · June 23, 2009, 10:09

Hi all,
I am starting trying to simulate a 2D fluidized bed
with CFX. I was wondering if anybody have
a basic *.gtm and *.cfx regarding a
2D gas solid fluidized bed.
Thanks a lot,
Alex

ckleanth · June 23, 2009, 11:45

maybe you need to start and do something with your problem and then show us; this way usualy people do help

amscosta · June 23, 2009, 13:34

Hi George,
Thanks for the reply.
My question is not a state of art issue. As fluidized bed
have been simulated during the last two decades by eulerian-eulerian and eulerian-langragian CFD models. Even there is a tutorial for the
CFX co-brother FLUENT. I just want to speed up the
simulation process as I know that certainly fluidized bed
simulations with CFX is a well developed subject.
Any user willing for sharing that knowledge is very
very welcome.
Alex

ckleanth · June 23, 2009, 18:20

I'm not that sure about the "well developed subject"

but I can tell you they are quite hard simulations to perform.

June 23, 2009, 10:09	2D fluidized bed mesh and definition files	#1
amscosta Member Alexandre M S Costa Join Date: Apr 2009 Posts: 31 Rep Power: 16	Hi all, I am starting trying to simulate a 2D fluidized bed with CFX. I was wondering if anybody have a basic .gtm and .cfx regarding a 2D gas solid fluidized bed. Thanks a lot, Alex

June 23, 2009, 11:45		#2
ckleanth Senior Member George Join Date: Mar 2009 Location: Birmingham, UK Posts: 257 Rep Power: 18	maybe you need to start and do something with your problem and then show us; this way usualy people do help __________________ Top 4 tips 1. Knowledge is everything and Ignorance is dangerous. 2. Understand your limitations and try to eliminate them. 3. Get yerself a bike and hoon the chuffer. You will soon learn why dogs like to hang their heads out the car window. 4. Please before asking any questions on how to run simulations in CFX, go though all the tutorials

June 23, 2009, 13:34	2D fluidized bed	#3
amscosta Member Alexandre M S Costa Join Date: Apr 2009 Posts: 31 Rep Power: 16	Hi George, Thanks for the reply. My question is not a state of art issue. As fluidized bed have been simulated during the last two decades by eulerian-eulerian and eulerian-langragian CFD models. Even there is a tutorial for the CFX co-brother FLUENT. I just want to speed up the simulation process as I know that certainly fluidized bed simulations with CFX is a well developed subject. Any user willing for sharing that knowledge is very very welcome. Alex

June 23, 2009, 18:20		#4
ckleanth Senior Member George Join Date: Mar 2009 Location: Birmingham, UK Posts: 257 Rep Power: 18	I'm not that sure about the "well developed subject" but I can tell you they are quite hard simulations to perform. __________________ Top 4 tips 1. Knowledge is everything and Ignorance is dangerous. 2. Understand your limitations and try to eliminate them. 3. Get yerself a bike and hoon the chuffer. You will soon learn why dogs like to hang their heads out the car window. 4. Please before asking any questions on how to run simulations in CFX, go though all the tutorials

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Technical] Definition of mesh sets	chbenz	OpenFOAM Meshing & Mesh Conversion	0	April 7, 2009 10:00
[mesh manipulation] TranformPoints gives skewed mesh Possible Bug	andersking	OpenFOAM Meshing & Mesh Conversion	3	March 25, 2008 21:33
mesh definition	Ogbeni	Main CFD Forum	0	November 22, 2005 17:51
Mesh definition	Ogbeni	CFX	0	November 22, 2005 17:49
Structured Grid Definition	craig shores	Main CFD Forum	3	March 21, 2001 14:48