again: export BC profile data

hungryfish · July 28, 2009, 05:27

Hi,

under some circumstances the header of exported profile data, e.g.

[Name]
radialprof

[Spatial Fields]
x,y,z

[Data]
....

is'nt generated by cfx5post. I did not found the reason for that behavior until now. I observed this character in CFX Release 11 as well as Rel. 12 on different platforms. It seems there is a dependence to "Name Aliases" but there is no rule for it.

smn · July 28, 2009, 06:25

hi:
when you want to export the datas you can choose the csv format (comma seperated values ) ,the txt format and etc ... choose the txt format.

hungryfish · July 28, 2009, 06:44

Thanks for your hint. But then I choose "txt" or "dat" I miss the header as well. It's the same attitude.

smn · July 28, 2009, 07:15

Quote:

Originally Posted by hungryfish

Thanks for your hint. But then I choose "txt" or "dat" I miss the header as well. It's the same attitude.

what do you mean by header?

smn · July 28, 2009, 07:19

i have got the following format"txt" in my current work with no problem.try again.

[Name]
Boundary ANSYS

[Data]
X [ m ], Y [ m ], Z [ m ]
-7.76188495e-003, -1.51233926e-001, 6.52593141e-003
-1.02818124e-002, -1.51129261e-001, 5.90505265e-003
.....

hungryfish · July 28, 2009, 07:24

Yes, this is the normal case - the field of data behind the header. But in my environment this header isn't existent sometimes. Why?

smn · July 29, 2009, 01:45

Quote:

Originally Posted by hungryfish

Yes, this is the normal case - the field of data behind the header. But in my environment this header isn't existent sometimes. Why?

sorry,its very strange!!!i dont know what to say...

July 28, 2009, 05:27	again: export BC profile data	#1
hungryfish New Member Gert Lindner Join Date: Jun 2009 Location: Berlin Posts: 8 Rep Power: 16	Hi, under some circumstances the header of exported profile data, e.g. [Name] radialprof [Spatial Fields] x,y,z [Data] .... is'nt generated by cfx5post. I did not found the reason for that behavior until now. I observed this character in CFX Release 11 as well as Rel. 12 on different platforms. It seems there is a dependence to "Name Aliases" but there is no rule for it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
export data at nodes	Meenu	FLUENT	1	December 30, 2011 01:24
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 19:08
applying profile data as a boundary condition	vadivel	CFX	1	June 9, 2007 07:11
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 17:27
CFXSolver Error Message using Profile Data on B	Tobias	CFX	0	August 26, 2005 07:27

July 28, 2009, 06:25		#2
smn Member Join Date: Jun 2009 Posts: 56 Rep Power: 16	hi: when you want to export the datas you can choose the csv format (comma seperated values ) ,the txt format and etc ... choose the txt format.

July 28, 2009, 06:44		#3
hungryfish New Member Gert Lindner Join Date: Jun 2009 Location: Berlin Posts: 8 Rep Power: 16	Thanks for your hint. But then I choose "txt" or "dat" I miss the header as well. It's the same attitude.

July 28, 2009, 07:19		#5
smn Member Join Date: Jun 2009 Posts: 56 Rep Power: 16	i have got the following format"txt" in my current work with no problem.try again. [Name] Boundary ANSYS [Data] X [ m ], Y [ m ], Z [ m ] -7.76188495e-003, -1.51233926e-001, 6.52593141e-003 -1.02818124e-002, -1.51129261e-001, 5.90505265e-003 .....

July 28, 2009, 07:24		#6
hungryfish New Member Gert Lindner Join Date: Jun 2009 Location: Berlin Posts: 8 Rep Power: 16	Yes, this is the normal case - the field of data behind the header. But in my environment this header isn't existent sometimes. Why?