CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CFX GGI Interface Error (non-overlapping)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 2, 2009, 21:39
Default CFX GGI Interface Error (non-overlapping)
  #1
New Member
 
Sergio
Join Date: Aug 2009
Posts: 1
Rep Power: 0
surge519 is on a distinguished road
Hello, I have a little issue and I was wondering if their is a way to solve this problem. I am using CFX v11 and I would like to interface two similar faces which lay on the same plane (Y,Z) however are in different rotational locations (Rotation Axis, X). So I would like to extract the temperature from FaceA, rotate it about the X axes some angle theta, and map it to FaceB. I tried using rotational periodicity, however this failed because the faces are normal to the rotation axis so CFX gives the following error.

+--------------------------------------------------------------------+
| ERROR #555000003 has occurred in subroutine CS_COMPUTE.
| Message:
|
| GGI intersection error. For a particular boundary face on domain
| interface:
|
| INTF_FACEA_FACEB
|
| The intersection failed to find any pixels. Likely causes are:
|
| 1) Very large differences in grid density between the two sides of
| the interface. In this case, increase the value of the expert
| parameter 'ggi bitmap resolution'.
| 2) An interface contains a degenerated face. In this case, also
| increase the values of the expert parameters
| 'ggi bitmap resolution' and/or 'ggi edge scale factor'.
| 3) A sliding interface has one or more nodes with zero radius.
| In this case, modify the grid to remove these nodes.
+--------------------------------------------------------------------+

Any suggestions or examples using CEL or Fortran would be greatly appreciated. I do not have access to CFX v12.

Thanks in Advance,

Sergio
surge519 is offline   Reply With Quote

Old   August 3, 2009, 19:54
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Hi,

If you define the sector using periodic boundaries and link them a GGI this should work. You might need to post an image to help us understand what you are trying to do.

Glenn Horrocks
ghorrocks is offline   Reply With Quote

Reply

Tags
cfx, ggi, interface, overlap

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09
porous-plain interface in CFX 4 Erik Birgersson CFX 0 March 25, 2002 12:32
Frozen Rotor Interface (CFX 5.5) gilberto CFX 4 November 14, 2001 22:07


All times are GMT -4. The time now is 09:45.