how to find property for compressible flow
as of now i assumed that my flow is incompressible and ran the problem.
I'm simulating turbo machine problem. i would like to simulate compressible(real) model in my problem. I'm simulating turbine problem. so pressure, temperature and density at inlet to outlet vary. i know the pressure and temperature at in & outlet. using some general relationship i could find the density at in & outlet. how do i find the varying property(density) of fluid through out the domain? In cfx solver we are giving property of fluid with respect to standard temperature (ex:25°C). if my problem is about 500°c means solver may automatically calculate the property for this temperature? if it won't means how or where do i get it? |
Sounds like you should look at the tutorial titled "Flow in an axial rotor-stator". This will show how this sort of simulation should be set up. While you are reading have a look in the best practices guide for turbomachinery, also in the documentation.
Glenn Horrocks |
Hi,
you have to use CEL function to vary the fluid property.think first is it needed for your problem? |
All times are GMT -4. The time now is 19:09. |