Cfx

ravikushalappa · September 2, 2009, 03:12

I would like to carry out CFD analysis the gear pump using CFX how to proceed. Is there any course material/ procedure to carry out the analysis.

ghorrocks · September 2, 2009, 05:46

Don't even consider doing this in anything but CFX V12. It is very easy in V12 using the new submerged grid, but near on impossible in any previous version. They even have a tutorial example in V12 of a gear pump so that will show you exactly how to do it.

ravikushalappa · September 2, 2009, 23:55

Thanks...
But I don't have CFX 12.0, I've CFX 11.0 so what should I do.
Where can I find CFX 12.0 help ??? Like some links...
And can I use that procedure in CFX 11.0

ghorrocks · September 3, 2009, 00:00

Talk to your CFX representative about getting V12. They can get you the documentation and arrange a trial etc. This type of simulation is extremely difficult in V11 or earlier but easy in V12 so don't waste your time with anything else.

ravikushalappa · September 3, 2009, 06:01

Is there any online resources available...
Or URL

ghorrocks · September 3, 2009, 06:08

Have a look on the ANSYS website and try a google for something like "CFX immersed solid". Also contact your CFX support person, or if you are a student contact the professor who is in charge of CFX.

ravikushalappa · September 3, 2009, 23:38

Okay... I'll Talk to my lecturer...
Thanks...

September 2, 2009, 03:12	Cfx	#1
ravikushalappa New Member ravi Join Date: Sep 2009 Posts: 5 Rep Power: 16	I would like to carry out CFD analysis the gear pump using CFX how to proceed. Is there any course material/ procedure to carry out the analysis.

September 2, 2009, 23:55	Cfx	#3
ravikushalappa New Member ravi Join Date: Sep 2009 Posts: 5 Rep Power: 16	Thanks... But I don't have CFX 12.0, I've CFX 11.0 so what should I do. Where can I find CFX 12.0 help ??? Like some links... And can I use that procedure in CFX 11.0

September 3, 2009, 06:01	Cfx	#5
ravikushalappa New Member ravi Join Date: Sep 2009 Posts: 5 Rep Power: 16	Is there any online resources available... Or URL

September 3, 2009, 23:38	Cfx	#7
ravikushalappa New Member ravi Join Date: Sep 2009 Posts: 5 Rep Power: 16	Okay... I'll Talk to my lecturer... Thanks...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 2, 2009, 05:46		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,692 Rep Power: 143	Don't even consider doing this in anything but CFX V12. It is very easy in V12 using the new submerged grid, but near on impossible in any previous version. They even have a tutorial example in V12 of a gear pump so that will show you exactly how to do it.

September 3, 2009, 00:00		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,692 Rep Power: 143	Talk to your CFX representative about getting V12. They can get you the documentation and arrange a trial etc. This type of simulation is extremely difficult in V11 or earlier but easy in V12 so don't waste your time with anything else.

September 3, 2009, 06:08		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,692 Rep Power: 143	Have a look on the ANSYS website and try a google for something like "CFX immersed solid". Also contact your CFX support person, or if you are a student contact the professor who is in charge of CFX.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pros and Cons for CFX, CFdesign, COMSOL	Val	Main CFD Forum	3	June 10, 2011 02:20
Importing solutions in CFX.	Alphonso	CFX	1	August 1, 2008 14:01
Fluent Vs CFX, density and pressure	Omer	CFX	9	June 28, 2007 04:13
PhD using CFX	Rui	CFX	9	May 28, 2007 05:59
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 04:07