 |
 |
 |
|
|
|
[Sponsors] | ||||
How to impose this heat flux boundary condition? |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 26, 2009, 14:36
|
How to impose this heat flux boundary condition?
|
#1 |
|
Senior Member
Jack
Join Date: Mar 2009
Posts: 106
Rep Power: 16  |
Dear friends,
if the heat flux was like that: from t = 0.0 up to 180.0 [s] => q" = 0.0 [W m^-2]; from t = 181.0 up to 1,079.0 [s] => q" = 250.0 [W m^-2] (=>constant); from t = 1,080.0 up to 1,260.0 [s] => q" = 0.0 [W m^-2]. best regards, Rogerio. 
|
|
|
|
|
|
November 26, 2009, 17:03
|
|
#2 |
|
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,700
Rep Power: 143 |
I would use a 1D interpolation function.
|
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Heat transer problem - boundary condition | dVoglander | OpenFOAM Running, Solving & CFD | 1 | April 1, 2009 10:30 |
| Slip boundary condition what is inside | normunds | OpenFOAM Running, Solving & CFD | 2 | June 4, 2007 06:45 |
| outlet heat flux on bondary condition | asghari | FLUENT | 0 | August 19, 2006 04:22 |
| Replace periodic by inlet-outlet pair | lego | CFX | 3 | November 5, 2002 20:09 |
| Pressure Boundary Condition | Matt Umbel | Main CFD Forum | 0 | January 11, 2002 10:06 |
Linear Mode
