How to analyse a assembly geometry by use of the ANSYS-ICEM ?

feixiangniao · March 25, 2010, 09:00

Hello everybody.
When i want to analyse a assembly geometry by use of the ANSYS-CFX,i must firstly import the geometry into the ANSYS-DesignModal,then i export the format of the parasolid to the ANSYS-ICEM in order to mesh the geometry .
In the ICEM ,i must firstly build some of the body represented different materal , then i use the auto-mesh tools(tera) to mesh the geometry.
But when i export the mesh to the CFX ,the assembly is only a part. so what's the problem ?

feixiangniao · March 31, 2010, 07:16

who can help me ?

Karatix · March 31, 2010, 09:26

Do you want to set boundary conditions?
If that is the case you have to create parts in ICEM containing the surfaces of your assembly.
You will then be able to select them as boundary conditions (after you set a domain).

Hope that helps

a.m. · April 2, 2010, 00:10

Also you can edit mesh in CFX pre (right click on mesh region -> edit). Start picking faces and move them to a new region. You should use 'fluid select' mouse mode while picking to select whole surface.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to open Icem mesh in Ansys Fluent?	emmkell	FLUENT	27	February 6, 2018 03:34
[ICEM] what does the different ANSYS ICEM and ANSYS Workbench?	agungwp	ANSYS Meshing & Geometry	8	April 12, 2016 04:51
help, ICEM mesh export to ANSYS	Fred	CFX	3	June 28, 2007 13:51
How to do Geometry from 3D mesh in ICEM	San24	Main CFD Forum	4	August 8, 2005 02:49
Problem importing GAMBIT mesh to Ansys geometry	David G.	CFX	0	June 19, 2005 06:01

March 31, 2010, 07:16		#2
feixiangniao New Member liuhuan Join Date: Dec 2009 Posts: 13 Rep Power: 16	who can help me ?

March 31, 2010, 09:26		#3
Karatix New Member Karatix Join Date: Sep 2009 Posts: 22 Rep Power: 16	Do you want to set boundary conditions? If that is the case you have to create parts in ICEM containing the surfaces of your assembly. You will then be able to select them as boundary conditions (after you set a domain). Hope that helps

April 2, 2010, 00:10		#4
a.m. New Member Alex Join Date: Mar 2010 Location: Russia Posts: 19 Rep Power: 16	Also you can edit mesh in CFX pre (right click on mesh region -> edit). Start picking faces and move them to a new region. You should use 'fluid select' mouse mode while picking to select whole surface.