torque calculation

mach000 · April 12, 2010, 07:07

Hi to everybody,
I need to calculate the torque on the object I'm studying.

I usually use this expression:

torque_z()@object (1)

in order to calculate the z component of the torque.
In this case the software will automatically calculate this torque considering the origin global axis point as reference point.

In my case I need to calculate this torque considering not the origin of the global axis but the "moving" origin of a new local axis system.

Do someone know how I can modify the expression (1) in order to solve my problem?

Thanks in advance

Ciro

ghorrocks · April 12, 2010, 18:35

A bit of basic mechanics can do it. Draw some vector diagrams and work it out.

mach000 · April 14, 2010, 04:00

Hi ghorrocks,
thank you for your reply but I think I was not able to explain my problem well.
I needed to write an expression in CFX pre in order to calculate the torque respect a a moving centroid of the planing hull I'm studying.
In the meanwhile I think I've solved my problem...now I have only to test it!
Thank you again!

April 12, 2010, 07:07	torque calculation	#1
mach000 Member Ciro Cannavacciuolo Join Date: Mar 2009 Posts: 35 Rep Power: 17	Hi to everybody, I need to calculate the torque on the object I'm studying. I usually use this expression: torque_z()@object (1) in order to calculate the z component of the torque. In this case the software will automatically calculate this torque considering the origin global axis point as reference point. In my case I need to calculate this torque considering not the origin of the global axis but the "moving" origin of a new local axis system. Do someone know how I can modify the expression (1) in order to solve my problem? Thanks in advance Ciro

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torque calculation with fluent	s wang	FLUENT	11	February 9, 2017 09:45
Calculation torque on arbitrary point	Mojtaba	CFX	0	February 6, 2009 23:45
Torque calculation in pumping equipment	Kirill	Main CFD Forum	0	June 26, 2007 16:59
Warning 097-	AB	Siemens	6	November 15, 2004 04:41
Torque calculation in centrifugal pump	novice	Siemens	0	August 11, 2004 05:47

April 12, 2010, 18:35		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	A bit of basic mechanics can do it. Draw some vector diagrams and work it out.

April 14, 2010, 04:00		#3
mach000 Member Ciro Cannavacciuolo Join Date: Mar 2009 Posts: 35 Rep Power: 17	Hi ghorrocks, thank you for your reply but I think I was not able to explain my problem well. I needed to write an expression in CFX pre in order to calculate the torque respect a a moving centroid of the planing hull I'm studying. In the meanwhile I think I've solved my problem...now I have only to test it! Thank you again!