|
[Sponsors] |
May 17, 2010, 22:02 |
How to make folded face in cfx-post?
|
#1 |
New Member
qutianpeng
Join Date: Sep 2009
Posts: 7
Rep Power: 16 |
As we know, we can make the Plane1(X=0) and Plane2(Y=0) in a column vessel through the tool of Plane in CFX-post. The two planes(Plane1 and Plane2) cross at the central axis of the column. Now the question is that I want to only show the folded face formed by two half faces of Plane1 and Plane2 divided by the central axis, at the same time delete the another two half faces. I don't know whether I have clearly illustrated the problem. Actually, I have a pic on the problem, but I don't know how to upload it. So...... Thanks in advance!
|
|
May 17, 2010, 22:31 |
|
#2 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
Use plane bounds to limit the plane to the area you want. Then use a surface group to combine them together into a single entity.
|
|
May 18, 2010, 00:25 |
|
#3 |
New Member
qutianpeng
Join Date: Sep 2009
Posts: 7
Rep Power: 16 |
Dear ghorrocks:
Hi! I am a newcomer. Could you tell me how to limit the plane to a siutable area? Thanks! Superqtp |
|
May 18, 2010, 07:49 |
|
#4 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,703
Rep Power: 143 |
Have a look at the bounds tab on CFD-Post when you are editting the plane object.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pros and Cons for CFX, CFdesign, COMSOL | Val | Main CFD Forum | 3 | June 10, 2011 02:20 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 07:36 |
How to make data file for matlab from CFX? | cfxbeginner | CFX | 4 | October 19, 2002 07:56 |
CFX 4.4 installation problem | Pandu Sattvika | CFX | 1 | December 1, 2001 04:07 |
File export from CFX 5.3 | Sinjae Hyun | CFX | 1 | July 12, 2000 09:20 |