CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Plunging airfoil + Flapping wing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 31, 2010, 07:19
Question Plunging airfoil + Flapping wing
  #1
New Member
 
Sony
Join Date: May 2010
Posts: 14
Rep Power: 15
SonyCFD is on a distinguished road
Hi all !

I am solving a 2D sinusoidally plunging airfoil.
I have an airfoil surronded by fluid domain which is moving with the airfoil and they are plunging in a stationary fluid domain. I have given plunging motion through CEL.

I am getting negative volumes, after about 30 time steps.
I have tried different modal exponent values for mesh stiffness, smaller time steps, but the problem persists.

Could some please suggest how to get rid of this problem?
Also could flapping wing model in CFX?

Thanks in advance
SonyCFD is offline   Reply With Quote

Old   May 31, 2010, 08:27
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
This is possible but difficult using the moving mesh approach. You can use a clever local smoothing function around the airfoil but it is tricky to get working.

A better approach is often to put the airfoil in a rotating frame of reference and connect it to the surroundings with a GGI. If you need to add translation you can make a section slide. If this type of approach is valid for you motion it is very good as it means you don't deform the mesh at all (but to do the translation you still need moving mesh).

This can also be done using immersed solids. This is by far the easiest approach but you will loose boundary layer fidelity and for airfoils that is usually critical.
ghorrocks is offline   Reply With Quote

Old   June 9, 2010, 23:26
Thumbs up
  #3
New Member
 
Sony
Join Date: May 2010
Posts: 14
Rep Power: 15
SonyCFD is on a distinguished road
Thanks Glen,
I will try out your suggestions.

Cheers.
SonyCFD is offline   Reply With Quote

Old   June 15, 2010, 05:17
Default
  #4
New Member
 
Join Date: Mar 2010
Posts: 5
Rep Power: 16
rezvan6587 is on a distinguished road
Hi Sony

I am working on plunging airfoil also. I am trying to simulate transition too.
I have some questions please
First of all about UDF, what is the format of this file? I have write a code as UDF but fluent does not understand it.
Second, about transition point. how can I set transition point in dynamic mesh?
Third, how can I define airfoil as moving boundary? could you please describe more extensively?
rezvan6587 is offline   Reply With Quote

Old   June 15, 2010, 07:49
Default
  #5
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
For questions about Fluent try http://www.cfd-online.com/Forums/fluent/
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ask help about flapping wing UDF aeropeng Fluent UDF and Scheme Programming 0 December 24, 2009 23:09
Drag of Plunging Airfoil mahzironrazak FLUENT 0 October 19, 2009 19:41
Modeling Backflow for a 3D Airfoil (Wing of Finite Span) Josh CFX 9 August 18, 2009 12:31
plunging airfoil vissu FLUENT 0 October 1, 2008 04:09
Help on the flapping wing Kearney Main CFD Forum 1 May 28, 2003 10:50


All times are GMT -4. The time now is 19:33.