Problem in Buoyancy Model?

dhrubo · June 4, 2010, 03:12

The working fluid is water and the model is about natural convection. So CFX itself imposes boussinesq's approximation as buoyancy model to solve the problem. But the simulated result is far away from the experimental result. It seems that there is some problem in simulation. I guess, the problem may lies in the buoyanocy model. But i am not sure. Any suggestion/advice will be highly appreciated. Thanks.

ghorrocks · June 4, 2010, 08:16

Could be many things. Can you describe what you are modelling? What Ra number? What temperature range?

dhrubo · June 5, 2010, 03:57

The model is for cooling purpose. A circle shaped loop where heat flux is imposed in the lower half and a fixed surface temperature is imposed on the upper half.

ghorrocks · June 5, 2010, 05:32

Unless you tell us the Ra number and temperature range I won't be able to help you much.

June 4, 2010, 03:12	Problem in Buoyancy Model?	#1
dhrubo New Member anonymous Join Date: May 2010 Posts: 2 Rep Power: 0	The working fluid is water and the model is about natural convection. So CFX itself imposes boussinesq's approximation as buoyancy model to solve the problem. But the simulated result is far away from the experimental result. It seems that there is some problem in simulation. I guess, the problem may lies in the buoyanocy model. But i am not sure. Any suggestion/advice will be highly appreciated. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A Problem with setting the time step in VOF model	Le	FLUENT	2	July 20, 2006 22:00
Converge problem of Mixture Model	Jen	FLUENT	8	August 17, 2005 18:23
Full Buoyancy model	Swapnil	CFX	2	April 30, 2003 08:54
How to set the buoyancy model?	may song	Phoenics	0	November 10, 2002 21:27
How to choose the buoyancy model?	ben	Phoenics	2	April 8, 2002 04:04

June 4, 2010, 08:16		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Could be many things. Can you describe what you are modelling? What Ra number? What temperature range?

June 5, 2010, 03:57		#3
dhrubo New Member anonymous Join Date: May 2010 Posts: 2 Rep Power: 0	The model is for cooling purpose. A circle shaped loop where heat flux is imposed in the lower half and a fixed surface temperature is imposed on the upper half.

June 5, 2010, 05:32		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Unless you tell us the Ra number and temperature range I won't be able to help you much.