graphic problem

chiccopeso · June 5, 2010, 17:33

if i import a new mesh in cfx i got some graphic problem that don't allow me to work on the mesh,cause i don't see clearly surface and parts.Now i don't have a pict available for report,maybe tomorrow.
i'm working on my laptop,intel duo 2.1 ghz,4 gb of ram with graphic device ATI MOBILITY RADEON x2300.
do u think is a problem with graphical device/bug or maybe is about cfx setting? it's the first time i use that,and i didn't change the default setting,the same mesh in other pc work good...

chiccopeso · June 6, 2010, 05:05

here the image from "stamp" key on my laptop
http://img3.imageshack.us/img3/1241/senzatitolo1akk.jpg
but look if i did "save picture.." from the software
http://img205.imageshack.us/img205/6172/unnamed.jpg

ghorrocks · June 6, 2010, 06:21

Looks like a display thing. Try fiddling with the display settings of your machine, the opengl ones are the ones to look at. Alternately you can get CFX to use software rendering which will almost certainly work but be slower (look in starting from the command line on how to do this).

chiccopeso · June 6, 2010, 06:34

thanks man,i try.
so u think is not a problem of graphical device or cfx,just a setting

ghorrocks · June 6, 2010, 07:56

All modern graphics cards support opengl. At least I have not seen one which does not. But they can get into funny modes which does not work with CFX.

Of course, as I said before, there is always software rendering. That does not use the graphics card at all so it should work fine - but will be a little slower.

chiccopeso · June 6, 2010, 13:03

i try to make a rendering by the cfx option menù,it doesn't work,i still have problem,i don't know i still see those square on the geometry.
i check my opengl version,is the 6.something...

ghorrocks · June 6, 2010, 18:47

Try starting CFX from the command line using software rendering. This should work.

chiccopeso · June 7, 2010, 06:52

"Try starting CFX from the command line using software rendering. This should work. "
i don't know how to

ghorrocks · June 7, 2010, 07:18

Look in the documentation under starting CFX from the command line.

June 5, 2010, 17:33	graphic problem	#1
chiccopeso New Member Join Date: Jun 2010 Posts: 7 Rep Power: 15	if i import a new mesh in cfx i got some graphic problem that don't allow me to work on the mesh,cause i don't see clearly surface and parts.Now i don't have a pict available for report,maybe tomorrow. i'm working on my laptop,intel duo 2.1 ghz,4 gb of ram with graphic device ATI MOBILITY RADEON x2300. do u think is a problem with graphical device/bug or maybe is about cfx setting? it's the first time i use that,and i didn't change the default setting,the same mesh in other pc work good...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Incoherent problem table in hollow-fiber spinning	Gianni	FLUENT	0	April 5, 2008 10:33
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
Is this problem well posed?	Thomas P. Abraham	Main CFD Forum	5	September 8, 1999 14:52

June 6, 2010, 05:05		#2
chiccopeso New Member Join Date: Jun 2010 Posts: 7 Rep Power: 15	here the image from "stamp" key on my laptop http://img3.imageshack.us/img3/1241/senzatitolo1akk.jpg but look if i did "save picture.." from the software http://img205.imageshack.us/img205/6172/unnamed.jpg

June 6, 2010, 06:21		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Looks like a display thing. Try fiddling with the display settings of your machine, the opengl ones are the ones to look at. Alternately you can get CFX to use software rendering which will almost certainly work but be slower (look in starting from the command line on how to do this).

June 6, 2010, 06:34		#4
chiccopeso New Member Join Date: Jun 2010 Posts: 7 Rep Power: 15	thanks man,i try. so u think is not a problem of graphical device or cfx,just a setting

June 6, 2010, 07:56		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	All modern graphics cards support opengl. At least I have not seen one which does not. But they can get into funny modes which does not work with CFX. Of course, as I said before, there is always software rendering. That does not use the graphics card at all so it should work fine - but will be a little slower.

June 6, 2010, 13:03		#6
chiccopeso New Member Join Date: Jun 2010 Posts: 7 Rep Power: 15	i try to make a rendering by the cfx option menù,it doesn't work,i still have problem,i don't know i still see those square on the geometry. i check my opengl version,is the 6.something...

June 6, 2010, 18:47		#7
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Try starting CFX from the command line using software rendering. This should work.

June 7, 2010, 06:52		#8
chiccopeso New Member Join Date: Jun 2010 Posts: 7 Rep Power: 15	"Try starting CFX from the command line using software rendering. This should work. " i don't know how to

June 7, 2010, 07:18		#9
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Look in the documentation under starting CFX from the command line.