CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Radiation solid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 23, 2010, 10:46
Default Radiation solid
  #1
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 15
Sas is on a distinguished road
Prompt as смоделировать radiation from solid domen to fluid.
Has used the model Monte Carlo but is not seen radiations from lower to upper.
Can not understand why.

http://imagepost.ru/?v=161/Heat_transfer_001.png
Sas is offline   Reply With Quote

Old   June 23, 2010, 19:42
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Do you need the Monte Carlo approach? Will the discrete transfer approach work for you? It is much simpler and far easier to get good results with, as long as transmittion/path effects are not significant.
ghorrocks is offline   Reply With Quote

Old   June 24, 2010, 11:42
Default
  #3
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 15
Sas is on a distinguished road
I use the discrete transfer.

Help who knows what adsorption coefficient and scattering coefficient for hard material (clinker/cement concrete/sand).
Sas is offline   Reply With Quote

Old   June 24, 2010, 19:45
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
These values vary a lot. Best if you get the data for your specific material. Otherwise a google search should be able to find some representative numbers.
ghorrocks is offline   Reply With Quote

Old   June 25, 2010, 07:12
Default
  #5
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 15
Sas is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
These values vary a lot. Best if you get the data for your specific material. Otherwise a google search should be able to find some representative numbers.
I searched on the internet, I can not find, I would know about for any solid to material are to be seen, these coefficients (in CFX uses linear coefficients with the dimension m ^ -1).
Sas is offline   Reply With Quote

Old   June 25, 2010, 07:36
Default
  #6
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Well if you are looking for web values then don't expect them to be even remotely accurate. Might as well just guess. I would guess that all those materials would have a high adsorption coefficient (0.9) and a low scattering coefficient (0.1). But these values are nothing but total guesses. If you can't find real values you should do a sensitivity study on them - the exact value probably does not make any difference anyway.
ghorrocks is offline   Reply With Quote

Old   June 25, 2010, 10:15
Default
  #7
Sas
New Member
 
Join Date: May 2010
Posts: 21
Rep Power: 15
Sas is on a distinguished road
Quote:
Originally Posted by ghorrocks View Post
Well if you are looking for web values then don't expect them to be even remotely accurate. Might as well just guess. I would guess that all those materials would have a high adsorption coefficient (0.9) and a low scattering coefficient (0.1). But these values are nothing but total guesses. If you can't find real values you should do a sensitivity study on them - the exact value probably does not make any difference anyway.
Thanks a lot!

CFX only requires these factors dimension m^-1. Is it possible to do something translated from a fraction of units (0,9 and 0,1) to m^-1?
Sas is offline   Reply With Quote

Old   June 26, 2010, 08:40
Default
  #8
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Oh yes, sorry - my previous post was wrong. The properties you refer to are the absorption and scattering of radiation inside the material. If you are using this solid material for particle tracking there is no radiation modelling inside the particle so these properties are not used. Just give them a value of zero.

These properties are only used for solid domains - if you have a solid domain of this material you better make something up.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How model radiation of both solid wall and fluid£¿ Harry Qiu FLUENT 2 February 4, 2013 00:04
radiation transfer between solid and fluid zone shyang FLUENT 0 August 13, 2008 13:45
Solid to Solid Radiation hossein Main CFD Forum 0 April 17, 2008 10:32
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19
definition difficulty-->DO radiation model Harry Qiu FLUENT 0 March 29, 2001 10:19


All times are GMT -4. The time now is 22:18.