3D Wing with rotating domain

Roland R · July 22, 2010, 04:56

Hello CFX Users,

I would like to calculate a 3D wing with deflected ailerons. Goal of the simulation is to investigate the flow around the wing during the rotation. What do you think, can the „rotating domain” option give correct result? (I use CFX 11.0)

Thanks in advance

Roland

zhaowei · July 22, 2010, 05:08

Hi, Roland

If u want to use the rotational domain, u have to configure the exact rotational speed. do u have this information? if so, of course u can get the correct simulation result.

Roland R · July 22, 2010, 07:40

Quote:

Originally Posted by zhaowei

Hi, Roland

If u want to use the rotational domain, u have to configure the exact rotational speed. do u have this information? if so, of course u can get the correct simulation result.

Hello Zhaowei,

yes, Based on the measurements I know the rot. speed in the case of this (maximum) aileron deflection.

Thanks for your help

Roland

July 22, 2010, 04:56	3D Wing with rotating domain	#1
Roland R Senior Member Roland Rakos Join Date: Mar 2009 Posts: 131 Rep Power: 17	Hello CFX Users, I would like to calculate a 3D wing with deflected ailerons. Goal of the simulation is to investigate the flow around the wing during the rotation. What do you think, can the „rotating domain” option give correct result? (I use CFX 11.0) Thanks in advance Roland

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
transient simulation of a rotating rectangle	icesniffer	CFX	1	August 8, 2009 07:25
Single Rotating Domain	fluentnoob	FLUENT	4	June 23, 2009 10:48
Difference b/t rotating wall and rotating domain?	Juno Kim	CFX	2	February 20, 2007 20:08
rotating domain in rotating domain, different axis	Robert Stringer	CFX	3	December 4, 2006 07:04
Size of rotating domain	Adam	CFX	4	November 28, 2006 10:28

July 22, 2010, 05:08		#2
zhaowei New Member Wei Zhao Join Date: Mar 2010 Posts: 28 Rep Power: 16	Hi, Roland If u want to use the rotational domain, u have to configure the exact rotational speed. do u have this information? if so, of course u can get the correct simulation result.