Mesh Morphing in CFX ???

vmlxb6 · October 18, 2010, 15:59

Does anyone know what mesh morphing actually is ??? A ppt document on the official ANSYS site talks about mesh morphing being used for large mesh deformation and to avoid re-meshing.It gives the example of ball valve and butterfly valve tutorial. My case is very similar to the ball valve.
But I cannot find any particular tutorial or theory on it ???

Can anyone help me with how I can implement mesh morphing in CFX???

Thank you very much.

ghorrocks · October 18, 2010, 17:56

Duplicate post - please post questions once only.

Lots of examples in the CFX tutorials.

vmlxb6 · October 18, 2010, 18:55

Butterfly valve and FSI in a ball valve tutorial does not mention mesh morphology anywhere ????? Can u name one tutorial that has mesh morphology ??????

Thank you.

ghorrocks · October 18, 2010, 20:17

Mesh morphing = moving mesh. Same thing.

vmlxb6 · October 18, 2010, 20:36

Ooohhhhh !!!!!!! I should have known........I thought it was some kind of algorithm used for solving mesh diffusion equation !!!!!!!!!!

Thanks !!

tillx · October 19, 2010, 20:23

I'm not sure if mesh morphing == moving mesh only. I'm playing around with that feature right now to see if I can put it to some use to solve my problem. When I setup a mesh with Advanced / Mesh Morphing / Enabled, the initial mesh is created according to the imported CAD data. When I update the Geometry in Workbench and Update then the mesh, the initial mesh is stretched to fit the new geometry. I haven't figured out to what extend that stretching works but it seems that the same nodes of the previous mesh are automatically spatially relocated. Moreover, if I Duplicate that initial Mesh in Workbench, the Mesh Morphing seems to carry over into the Duplicate Mesh, which is nice so I can setup my array of interlinked Meshes to run several trials of the transient simulation without having to remesh every time again. I haven't figured out yet how far the Mesh Morphing stretches and what happens, when new nodes are created. And most importantly for my problem, if mass continuity is maintained that way between individual transient steps with separate meshes. Isn't it thrilling !!!

vmlxb6 · October 19, 2010, 20:25

WOWW thats amazing.....Didnt know meshing could get so interesting !!!!!

vmlxb6 · October 19, 2010, 20:28

Inferring from what you wrote, is mesh morphing an option ??? that can be enabled or disabled ????? I dont think so !!!!!! How are you playing with it ????

tillx · October 19, 2010, 20:41

Well, I'm warming up to the subject myself right now. Check out at the bottom of "Advanced" when you click on the Mesh Icon in the Feature Management Tree and try it. Let me know if you find out something new. I'm out for now on this topic. Good luck!

vmlxb6 · October 19, 2010, 21:05

Are you talking about the work bench ?????? Coz am using stand alone and not work bench !!!!!

Best of luck to you !!!!!!

vmlxb6 · March 9, 2011, 14:59

Am supposed to be using this mesh stiffness parameter which makes my mesh stiff along the boundary, and less stiff as it goes away. The stiffness range is from 1e-15 to 1e15.
Is it the stiffness effect the causes the BL to defom i guess.
Am using 3 different mes snothings
Ha anyone done the turotial # 22: Fluid structure interaction & nesh deformation ???

Thank you.

October 18, 2010, 15:59	Mesh Morphing in CFX ???	#1
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Does anyone know what mesh morphing actually is ??? A ppt document on the official ANSYS site talks about mesh morphing being used for large mesh deformation and to avoid re-meshing.It gives the example of ball valve and butterfly valve tutorial. My case is very similar to the ball valve. But I cannot find any particular tutorial or theory on it ??? Can anyone help me with how I can implement mesh morphing in CFX??? Thank you very much.

October 18, 2010, 18:55	@ Ghorocks	#3
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Butterfly valve and FSI in a ball valve tutorial does not mention mesh morphology anywhere ????? Can u name one tutorial that has mesh morphology ?????? Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
CFX Mesh Deformation problem	Silmaril	CFX	7	October 19, 2010 10:00
Import Gridgen Mesh V15 to CFX 10	Christina	CFX	3	August 1, 2006 09:06
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks !	Vu Trinh Tuan	CFX	11	March 28, 2005 19:04
importing mesh from ICEM CFD into CFX 5	Jay	CFX	2	November 12, 2002 13:46

October 18, 2010, 17:56		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Duplicate post - please post questions once only. Lots of examples in the CFX tutorials.

October 18, 2010, 20:17		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	Mesh morphing = moving mesh. Same thing.

October 18, 2010, 20:36		#5
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Ooohhhhh !!!!!!! I should have known........I thought it was some kind of algorithm used for solving mesh diffusion equation !!!!!!!!!! Thanks !!

October 19, 2010, 20:23		#6
tillx New Member Till Join Date: Oct 2010 Posts: 12 Rep Power: 15	I'm not sure if mesh morphing == moving mesh only. I'm playing around with that feature right now to see if I can put it to some use to solve my problem. When I setup a mesh with Advanced / Mesh Morphing / Enabled, the initial mesh is created according to the imported CAD data. When I update the Geometry in Workbench and Update then the mesh, the initial mesh is stretched to fit the new geometry. I haven't figured out to what extend that stretching works but it seems that the same nodes of the previous mesh are automatically spatially relocated. Moreover, if I Duplicate that initial Mesh in Workbench, the Mesh Morphing seems to carry over into the Duplicate Mesh, which is nice so I can setup my array of interlinked Meshes to run several trials of the transient simulation without having to remesh every time again. I haven't figured out yet how far the Mesh Morphing stretches and what happens, when new nodes are created. And most importantly for my problem, if mass continuity is maintained that way between individual transient steps with separate meshes. Isn't it thrilling !!!

October 19, 2010, 20:25		#7
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	WOWW thats amazing.....Didnt know meshing could get so interesting !!!!!

October 19, 2010, 20:28		#8
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Inferring from what you wrote, is mesh morphing an option ??? that can be enabled or disabled ????? I dont think so !!!!!! How are you playing with it ????

October 19, 2010, 20:41		#9
tillx New Member Till Join Date: Oct 2010 Posts: 12 Rep Power: 15	Well, I'm warming up to the subject myself right now. Check out at the bottom of "Advanced" when you click on the Mesh Icon in the Feature Management Tree and try it. Let me know if you find out something new. I'm out for now on this topic. Good luck!

October 19, 2010, 21:05		#10
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Are you talking about the work bench ?????? Coz am using stand alone and not work bench !!!!! Best of luck to you !!!!!!

March 9, 2011, 14:59		#11
vmlxb6 Senior Member Ugly Kid Joe Join Date: Aug 2010 Posts: 193 Rep Power: 15	Am supposed to be using this mesh stiffness parameter which makes my mesh stiff along the boundary, and less stiff as it goes away. The stiffness range is from 1e-15 to 1e15. Is it the stiffness effect the causes the BL to defom i guess. Am using 3 different mes snothings Ha anyone done the turotial # 22: Fluid structure interaction & nesh deformation ??? Thank you.