Memory Factor Error

RichardB86 · November 27, 2010, 12:37

Hi

I have been running a simulation on a cluster. The simulation worked the first time I ran it with no problems however I have since refined the mesh and on resubmitting the file get the following error.

| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Memory error in ILURES. Please increase the value of the expert |
| parameter 'ilures memory factor' (default value is 1.0) and try a- |
| gain.

I have adjusted a couple of memory settings but am unable to find the setting it recommends above. The model is quite complicated however having worked once I wouldn't have thought a localised mesh refinement would make to much difference to the way it runs.

Would appreciate any advice any one has on this.

Thanks

Richard

ghorrocks · November 27, 2010, 19:54

This is an undocumented expert parameter. Add the expert parameter section and manually add this expert parameter and set it to a new value.

RichardB86 · November 28, 2010, 11:03

Hi

Thanks for your reply. I am unfamiliar with adding expert parameters. Is this done by editing the text or through the GUI interface?

Thanks

Richard

joey2007 · November 28, 2010, 14:15

There two main options do realize it. There is a command line tool for read out the ccl from the def file. The other way would be to add an documented expert parameter by CFX-Pre as dummy. Then open with right click on the object expert parameter in the tree and edit in command editor. Now you can add your parameter by editing the text. Now you delete or reset your dummy. Click process in the command editor. Possibly you have to ignore the error in CFX-Pre

November 27, 2010, 12:37	Memory Factor Error	#1
RichardB86 New Member Richard Join Date: Oct 2010 Posts: 5 Rep Power: 15	Hi I have been running a simulation on a cluster. The simulation worked the first time I ran it with no problems however I have since refined the mesh and on resubmitting the file get the following error. \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| Memory error in ILURES. Please increase the value of the expert \| \| parameter 'ilures memory factor' (default value is 1.0) and try a- \| \| gain. I have adjusted a couple of memory settings but am unable to find the setting it recommends above. The model is quite complicated however having worked once I wouldn't have thought a localised mesh refinement would make to much difference to the way it runs. Would appreciate any advice any one has on this. Thanks Richard

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to optimize the memory usage when using FEM	vasilis	Main CFD Forum	11	August 24, 2009 23:57
Memory error?	Young	CFX	3	September 30, 2008 11:33
Out of Memory	Naghman Khan	FLUENT	3	August 30, 2007 06:08
CFX CPU time & real time	Nick Strantzias	CFX	8	July 23, 2006 17:50
Run-Time memory conifguration Error	Graeme	CFX	1	February 20, 2006 23:04

November 27, 2010, 19:54		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	This is an undocumented expert parameter. Add the expert parameter section and manually add this expert parameter and set it to a new value.

November 28, 2010, 11:03		#3
RichardB86 New Member Richard Join Date: Oct 2010 Posts: 5 Rep Power: 15	Hi Thanks for your reply. I am unfamiliar with adding expert parameters. Is this done by editing the text or through the GUI interface? Thanks Richard

November 28, 2010, 14:15		#4
joey2007 Senior Member Join Date: Mar 2009 Location: Europe Posts: 169 Rep Power: 17	There two main options do realize it. There is a command line tool for read out the ccl from the def file. The other way would be to add an documented expert parameter by CFX-Pre as dummy. Then open with right click on the object expert parameter in the tree and edit in command editor. Now you can add your parameter by editing the text. Now you delete or reset your dummy. Click process in the command editor. Possibly you have to ignore the error in CFX-Pre