Overflow error

Aliebadi · July 11, 2014, 10:49

آHello every one !
I am trying to model a two phase channel including water and air. I specify the velocity of water and air as the inlet boundary condition and average static pressure equal to zero for the outlet. The analysis type is transient. 100 kpa pressure and slight velocity are considered as initial condition. But every time that I run this code, program stops by overflow error. Who can help me ?

ghorrocks · July 13, 2014, 07:32

Have you read the FAQ? http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

Are you sure your exit boundary is correct? Check the flow over a bump tutorial for how they do it.

July 11, 2014, 10:49	Overflow error	#1
Aliebadi New Member Ali ebadi Join Date: Jun 2014 Posts: 3 Rep Power: 11	آHello every one ! I am trying to model a two phase channel including water and air. I specify the velocity of water and air as the inlet boundary condition and average static pressure equal to zero for the outlet. The analysis type is transient. 100 kpa pressure and slight velocity are considered as initial condition. But every time that I run this code, program stops by overflow error. Who can help me ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] blockMesh with double grading.	spwater	OpenFOAM Meshing & Mesh Conversion	92	January 12, 2019 09:00
Compile calcMassFlowC	aurore	OpenFOAM Programming & Development	13	March 23, 2018 07:43
Ansys Fluent 13.0 UDF compilation problem in Window XP (32 bit)	Yogini	Fluent UDF and Scheme Programming	7	October 3, 2012 07:24
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 10:23
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 19:08

July 13, 2014, 07:32		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Have you read the FAQ? http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F Are you sure your exit boundary is correct? Check the flow over a bump tutorial for how they do it.