Importing a project from ICEM to CFX pre

faisal_durr · February 8, 2011, 08:58

Hi guys, i have made this rectangular room in ICEM with inlet and outlets defined as different parts. I have also applied blocking and mesh onto the geometry. When i try to write an input file for cfx it writes it in a .cfx5 format which cfxpre really cant open. But if i try import>mesh then i can open the .cfx5 file in cfxpre. But this results in just a cube with the mesh. While all my inlet/outlets etc (i.e. parts) do no longer exist. Help plz....

bharath · February 9, 2011, 09:39

your problem is not clear.try to attach image.In tree structure (like sample.cfx5) expand it.there you can see the parts you created

faisal_durr · February 9, 2011, 11:20

Thanks Bharath, my problem got solved. All i had to do was convert the mesh into unstructured mesh and import .mesh file into CFX pre.

February 8, 2011, 08:58	Importing a project from ICEM to CFX pre	#1
faisal_durr Member Faisal Durrani Join Date: Nov 2009 Location: England Posts: 62 Rep Power: 18	Hi guys, i have made this rectangular room in ICEM with inlet and outlets defined as different parts. I have also applied blocking and mesh onto the geometry. When i try to write an input file for cfx it writes it in a .cfx5 format which cfxpre really cant open. But if i try import>mesh then i can open the .cfx5 file in cfxpre. But this results in just a cube with the mesh. While all my inlet/outlets etc (i.e. parts) do no longer exist. Help plz....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exporting mesh to CFX Pre	Usman Ali	CFX	4	October 22, 2007 12:09
Importing CFX10 data into CFX 11	Stephen	CFX	1	May 11, 2007 00:42
Importing CFX10 data into CFX 11	Stephen	CFX	0	May 9, 2007 07:55
2D simulation - ICEM meshing for CFX question	Ben Makhal	CFX	5	April 11, 2007 09:44
export mesh made in ICEM to cfx	Morten Andersen	Main CFD Forum	2	October 26, 2006 23:52

February 9, 2011, 09:39		#2
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 18	your problem is not clear.try to attach image.In tree structure (like sample.cfx5) expand it.there you can see the parts you created

February 9, 2011, 11:20		#3
faisal_durr Member Faisal Durrani Join Date: Nov 2009 Location: England Posts: 62 Rep Power: 18	Thanks Bharath, my problem got solved. All i had to do was convert the mesh into unstructured mesh and import .mesh file into CFX pre.