Custom view in CFD-Post

shahpar73 · February 23, 2011, 09:54

How can I create my own view in CFD-Post?
I want to see results on a plane which is not parallel to either planes and unable to get orthogonal view by rotating that plane.

joey2007 · February 23, 2011, 15:42

you may use the method plane by three points

shahpar73 · February 23, 2011, 22:00

The plane by three point has already been created and I want to see results on that plane. When I use the "predefined camera" views, I get the plane in vertical. I try to rotate it to horizontal and I get horizontal but not perfectly orthogonal. Any idea to make it orthogonal?

Procyon · June 27, 2011, 10:53

Heyho,

with information from http://www.cfd-online.com/Forums/cfx...era-views.html

Code:

VIEW:View 1

Camera Mode = User Specified
 CAMERA:
 Option = Pivot Point and Rotation
 Pivot Point = 1.37142, 0.036504, 0.036504
Rotation = -90, 0, 0
Scale = 1.0
Pan = 0,0

 END
 END

Procyon

February 23, 2011, 09:54	Custom view in CFD-Post	#1
shahpar73 Member Shahid Parvez Join Date: Jul 2009 Location: Pakistan Posts: 38 Rep Power: 17	How can I create my own view in CFD-Post? I want to see results on a plane which is not parallel to either planes and unable to get orthogonal view by rotating that plane.

February 23, 2011, 15:42		#2
joey2007 Senior Member Join Date: Mar 2009 Location: Europe Posts: 169 Rep Power: 18	you may use the method plane by three points __________________ - - - - - ------------------------------------------------------------------------ Please do not forget: I am not paid for answering your questions. Thousands of issues can cause a division by zero. Please do not capture a thread, with the argument: "I have the same issue ...."

June 27, 2011, 10:53		#4
Procyon New Member Procyon Join Date: Jan 2011 Posts: 8 Rep Power: 16	Heyho, with information from http://www.cfd-online.com/Forums/cfx...era-views.html Code: VIEW:View 1 Camera Mode = User Specified CAMERA: Option = Pivot Point and Rotation Pivot Point = 1.37142, 0.036504, 0.036504 Rotation = -90, 0, 0 Scale = 1.0 Pan = 0,0 END END Procyon EnricoCrobu likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ppm contour in cfd post	bharath	CFX	1	December 19, 2010 13:28
STAR-Works : Mainstream CAD with CFD	CD adapco Group Marketing	Siemens	0	February 13, 2002 12:23
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10
CFD JOBS and Expected Salary....	Noel Harrison	Main CFD Forum	11	November 22, 2000 07:15
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44

February 23, 2011, 22:00		#3
shahpar73 Member Shahid Parvez Join Date: Jul 2009 Location: Pakistan Posts: 38 Rep Power: 17	The plane by three point has already been created and I want to see results on that plane. When I use the "predefined camera" views, I get the plane in vertical. I try to rotate it to horizontal and I get horizontal but not perfectly orthogonal. Any idea to make it orthogonal?