|
[Sponsors] |
February 26, 2011, 04:19 |
Moving mesh
|
#1 |
New Member
Karthikeshwaran Ramasany
Join Date: Feb 2011
Location: chennai
Posts: 4
Rep Power: 15 |
Hi
Am facing problem in moving mesh. Rotor rotates with in the stator in eccentrically. How to set the conditions for mesh deformation. My rotor is rotating at a speed of "x". and it is eccentrically moves int the stator with rotation. The eccentricity - 4.078 Dia of rotor- 39.878 How can i define in cfx.pls help me http://www.youtube.com/watch?v=12Wszv1wUMk In this link u will come to know my problem.... |
|
February 28, 2011, 02:36 |
Moving mesh
|
#2 |
Member
Venkat
Join Date: Nov 2009
Posts: 35
Rep Power: 16 |
Hi,
You can check a tutorial titled "Fluid structure and mesh deformation". It might give you just an idea of how moving mesh can be done. I'm not sure about the rotating machinery |
|
February 28, 2011, 02:53 |
|
#3 |
New Member
Karthikeshwaran Ramasany
Join Date: Feb 2011
Location: chennai
Posts: 4
Rep Power: 15 |
thanks a lot
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
How to let the mesh motion solver just solve a small region near a moving boundary? | zhajingjing | OpenFOAM Running, Solving & CFD | 9 | April 28, 2016 04:15 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
CavitatingFoam with a moving mesh mass conservation error | idosil | OpenFOAM Running, Solving & CFD | 3 | November 27, 2007 17:27 |
Waves halted by moving mesh | Piotr Czajko | COMSOL | 1 | November 24, 2007 02:00 |