|
[Sponsors] |
February 25, 2011, 01:30 |
Frustrating Meshing issue
|
#1 |
Member
Derwin Parkin
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
Has anyone encountered this in Ansys 13 Meshing before? I have tried EVERYTHING to get that region where the elements grow larger to remain fine...but it keeps forcing this to occur! Any ideas? I am sweeping it from the face you see to the other side, so all I have is sizing controls at my disposal... Larger image here http://www.flickr.com/photos/derz/5475898830/ |
|
February 25, 2011, 14:46 |
|
#2 |
Senior Member
Edmund Singer P.E.
Join Date: Aug 2010
Location: Minneapolis, MN
Posts: 511
Rep Power: 20 |
If that is the only part of your mesh, it looks like you can reduce the Max Face Size and the Max Size value down from the default. Hard to read but your defaults look like ~66mm and 132mm respectively. Crank that down to a more reasonable value that is close to what you are trying to control to.
|
|
February 28, 2011, 22:11 |
|
#3 |
Member
Derwin Parkin
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
This has worked well...thanks!
|
|
February 28, 2011, 22:28 |
|
#4 |
Member
Derwin Parkin
Join Date: Feb 2010
Posts: 35
Rep Power: 16 |
Is there any way to make a max face sizing on just one part, rather than globally?
|
|
March 1, 2011, 09:31 |
|
#5 |
Senior Member
Edmund Singer P.E.
Join Date: Aug 2010
Location: Minneapolis, MN
Posts: 511
Rep Power: 20 |
Apply mesh sizing to each individual body. I beileive you need to make sure your global size encompasses your individual mesh sizes or the global might win out.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Simple Frustrating Meshing Issue in Gambit (w/pics) | Dylan | ANSYS Meshing & Geometry | 6 | March 23, 2009 16:14 |
Best Meshing scheme for Cylinder | Nutrex | Main CFD Forum | 4 | July 29, 2008 11:03 |
Meshing locks workbench window. | andy2o | CFX | 0 | February 1, 2008 05:01 |
Singularity of grid?Volume meshing vs face meshing | Ken | Main CFD Forum | 0 | September 4, 2003 11:09 |
Volume Meshing & Face Meshing? singularity of grid | ken | FLUENT | 0 | September 4, 2003 11:08 |