CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

metallic and deviation angles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 1, 2011, 17:17
Default metallic and deviation angles
  #1
New Member
 
Join Date: Mar 2011
Posts: 4
Rep Power: 15
AndreaDB is on a distinguished road
Hi all,
I'm new in CFX and basically I have not enough time to learn it properly. I went through tutorials but they wasn't of help for me.
I have files .def and .res, so I think I have all results. the issue is that
1: of my geometry ( an Inlet guide Vane) I'm not able to understand from where extract the metallic angles of the blade
2. how calculate the incidence of the flow of whom I have the X,Y,Z components but i have to know it with respect to the inlet domain of whom i don't know the orientation in the space
3. I don't know then how to calculate the deviation angle at the exit of the blade if i don't have the metallic angles.

how do I have to manage with these problems if, for example, I would like to extract datas from the midspan?

Tanks a lot.
AndreaDB is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 08:58.