Coal particles at outlet -- CFD Online Discussion Forums

April 7, 2011, 21:47	Coal particles at outlet	#1
bharath Senior Member Bharath kumar Join Date: Apr 2009 Posts: 169 Rep Power: 17	Hi all, am doing a coal combustion simulation in CFX13 in Burner.My coal is 42% ash and 58% raw combustible. after convergence i checked the out file for particle summary.It gives some X (100%) mass flow rate at inlet and Y (48%) at outlet. Now i have a doubt on this.whether this includes ash mass fraction also or the unburned carbon particles alone.Please clarify me. thanks in advance

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error when coal particles flow with air	Jane	CFX	1	May 16, 2009 11:27
Coal particles in combustion chamber	Luis Filipe Fabiani	CFX	2	March 10, 2009 15:37
Coal combustion. Particles number at inlet.	Georg	CFX	2	November 29, 2008 08:33
VOF Outlet boundary condition in cfd - ace	JM	Main CFD Forum	0	December 15, 2006 08:07
CFX5 coal combustion outlet enthalpy	leo	CFX	0	October 12, 2006 08:14

All times are GMT -4. The time now is 09:58.