modeling equilibrium state of 2-phase saturated nitrogen

muyongbin · April 11, 2011, 03:22

hello alls
hope you have a good day. I want to model a equilibrium state of the 2-phase saturated nitrogen using CFX recently , but no idea how to do that.
problem description:

a cooper bar is inserted into a pressure vessel which is colsed and full of liquid nitrogen initially . all boundary congditions are adiabatic except two
planes: the top of the bar keeping the constant temperature 300K ,and the bottom of the vessel keeping 70K.
so heat leak into the vessel and go out through bottom .
that lead to pressure , level state in a equilibrium.
I only interested in the steady modeling .

who have experience in modeling such a phenomenon, please give me some suggestions.
best regards, mu

I appreciate giving a email to me

muyongbin@163.com

ghorrocks · April 11, 2011, 07:23

This would be very hard to model in CFD. If you are interested in the final steady state answer I would try to simplify it down to a 1D model and use matlab or a fortran program to solve it. Is that possible?

muyongbin · April 12, 2011, 02:17

thanks ghorrocks
it can not be simplydied to 1D .
as it is just one part of an integral problem in practice

best regards
mu

April 11, 2011, 03:22	modeling equilibrium state of 2-phase saturated nitrogen	#1
muyongbin New Member muyongbin Join Date: Apr 2011 Posts: 2 Rep Power: 0	hello alls hope you have a good day. I want to model a equilibrium state of the 2-phase saturated nitrogen using CFX recently , but no idea how to do that. problem description: a cooper bar is inserted into a pressure vessel which is colsed and full of liquid nitrogen initially . all boundary congditions are adiabatic except two planes: the top of the bar keeping the constant temperature 300K ,and the bottom of the vessel keeping 70K. so heat leak into the vessel and go out through bottom . that lead to pressure , level state in a equilibrium. I only interested in the steady modeling . who have experience in modeling such a phenomenon, please give me some suggestions. best regards, mu I appreciate giving a email to me muyongbin@163.com

April 12, 2011, 02:17	thanks ghorrocks	#3
muyongbin New Member muyongbin Join Date: Apr 2011 Posts: 2 Rep Power: 0	thanks ghorrocks it can not be simplydied to 1D . as it is just one part of an integral problem in practice best regards mu

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 06:21
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 07:27
Constant velocity of the material	Sas	CFX	15	July 13, 2010 09:56
regarding steady state discrete phase calculations	hajszan_gyula	FLUENT	1	February 28, 2006 02:32
species transport and discrete phase modeling ....	farhath	FLUENT	2	February 11, 2006 02:09

April 11, 2011, 07:23		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 18,001 Rep Power: 146	This would be very hard to model in CFD. If you are interested in the final steady state answer I would try to simplify it down to a 1D model and use matlab or a fortran program to solve it. Is that possible?