CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

pneumatic conveying model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 20, 2011, 19:30
Default pneumatic conveying model
  #1
New Member
 
Chris Cavani
Join Date: Jan 2011
Posts: 20
Rep Power: 15
cavani is on a distinguished road
Hi all,

I am desperately trying to gain pressure drop analysis of air carrying solid particles of cement through a 2m pipe of diameter 53mm.

I performed this analysis using ANSYS Fluent and got, what I perceive to be, fairly accurate results (around 1600Pa). However, the results I am getting for CFX simulation is a lot lower (around 200 Pa).

The type of analysis I am performing is Eulerian-Eulerian. The air phase is set up as a continuous fluid and the cement phase is set up as a dispersed solid. The particle size for cement is 25 micron. I have set up the viscosity for cement as kinetic theory in Fluent; in CFX the help menu suggests I give the cement phase an insignificant viscosity and make it free slip at the wall boundary though this gives me a smaller pressure drop than say making the cement viscosity the same as the air viscosity (1.8205e-5).

From what I have mentioned here, is there any sign of error in my method that is disabling me from producing reasonable results?

Any help would be appreciated. I am surprised at how difficult it is to find any details, on how a pneumatic conveying model should be made, online.
cavani is offline   Reply With Quote

Old   April 20, 2011, 20:01
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,655
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 05:41
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27
Reynolds Stress model in CFX vs Fluent Tim CFX 1 October 7, 2009 07:19
Grid resolution for full-scale and down scaled model gravis Main CFD Forum 0 October 2, 2009 11:27
Heat Dissipation in Pneumatic conveying Mehul157@yahoo.com CFX 0 May 20, 2009 02:55


All times are GMT -4. The time now is 06:11.