CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CFX RMS instead of mass momentum Efficiency or Pressure ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 8, 2011, 19:58
Default CFX RMS instead of mass momentum Efficiency or Pressure ratio
  #1
Senior Member
 
Saima
Join Date: Apr 2009
Location: Canada
Posts: 185
Rep Power: 15
Saima is an unknown quantity at this point
hello Guys,

I want to stop my flow solver in CFX by givening RMS on efficiency instead of RMS on mass & momentum.

Please let me know how it could be possible?

Best Regards,
__________________
Best Redards,
Saima
Saima is offline   Reply With Quote

Old   June 13, 2011, 20:29
Default
  #2
Senior Member
 
Saima
Join Date: Apr 2009
Location: Canada
Posts: 185
Rep Power: 15
Saima is an unknown quantity at this point
I want to stope solver by the efficiency smoothness. That means I want to see efficiency curve if its not changes than want to stope my solver.

I found in CFX solver control there is an option interrupt control and i can define efficiency expression. But How can i take difference of two iteration (smoothness)?

Hope you understand my question.
__________________
Best Redards,
Saima
Saima is offline   Reply With Quote

Old   June 15, 2011, 13:01
Default
  #3
Senior Member
 
Saima
Join Date: Apr 2009
Location: Canada
Posts: 185
Rep Power: 15
Saima is an unknown quantity at this point
There is a way but it is noit exactly i want. It is in CFX under solver control with the name of interrupt control. By clicking on it we can write an expression and it interrupt flow solver when it reach to the RMS value.
__________________
Best Redards,
Saima
Saima is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting Pressure Boundary Conditions in ANSYS CFX Pre saisanthoshm88 CFX 21 February 22, 2017 17:50
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
about reference pressure in CFX adam2008 CFX 0 May 14, 2011 23:14
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) HB &DS CFX 0 January 9, 2000 14:19
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 11:31.