Volume fraction in multiphase simulation

juliom · July 29, 2011, 09:23

Dear Collegues,
I have been working on my thesis of master degree, It is related to multiphase fluid flow simulation, especifically in: gas-liquid vertical gravitational separator.
I´m working in ANSYS CFX and the most difficult part is to setup the volume fraction at the inlet.
The main goal of the thesis is to evaluate the separation process within the vessel, but the data used is from the real process, for example:
Oil rate, gas rate, pressure, densities, viscocity and so on..
THE VOLUMEN FRACTION DOES NOT APPEAR IN NO DATA SHEET.
How can I get this volume fraction?
please help me

AliTr · July 30, 2011, 02:38

if you have the oil rate, gas rate and densities you should be able to work out the total volume and also the volume fraction for each phase.

juliom · July 30, 2011, 08:26

Quote:

Originally Posted by AliTr

if you have the oil rate, gas rate and densities you should be able to work out the total volume and also the volume fraction for each phase.

AliTr,
how do I get the volume fraction with that information?
Since the volume fraction is the volume of one constitutient divided by the the volume of all constitutient!!!
I just have mass flow rates and volume flow rate, I other word I just have FLOWS, and volume fraction is calculated by VOLUME.

July 29, 2011, 09:23	Volume fraction in multiphase simulation	#1
juliom Senior Member Julio Mendez Join Date: Apr 2009 Location: Fairburn, GA. USA Posts: 290 Rep Power: 18	Dear Collegues, I have been working on my thesis of master degree, It is related to multiphase fluid flow simulation, especifically in: gas-liquid vertical gravitational separator. I´m working in ANSYS CFX and the most difficult part is to setup the volume fraction at the inlet. The main goal of the thesis is to evaluate the separation process within the vessel, but the data used is from the real process, for example: Oil rate, gas rate, pressure, densities, viscocity and so on.. THE VOLUMEN FRACTION DOES NOT APPEAR IN NO DATA SHEET. How can I get this volume fraction? please help me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Weighted average volume fraction	Yasser	FLUENT	5	April 11, 2015 08:25
two Phase column simulation	chemeng	OpenFOAM	3	August 18, 2010 12:53
volume fraction gradient in multiphase flow	vahid2572	Fluent UDF and Scheme Programming	0	September 8, 2009 01:13
How to give volume fraction in multiphase models	chhanwal	FLUENT	0	August 13, 2009 00:07
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59

July 30, 2011, 02:38		#2
AliTr Member Ali Torbaty Join Date: Jul 2009 Location: Sydney, Australia Posts: 72 Rep Power: 16	if you have the oil rate, gas rate and densities you should be able to work out the total volume and also the volume fraction for each phase.