Simulate Secondary Flow Blockage -- CFD Online Discussion Forums

August 10, 2011, 00:38	Simulate Secondary Flow Blockage	#1
zephyrus17 New Member Join Date: Sep 2010 Posts: 28 Rep Power: 0	How would I simulate secondary flow blockage in CFX 12.1? Basically it's a heating coil with 2mm-gap fins that's in front of the Opening. Experimental results show an entrainment ratio one whole value less than my CFD results without secondary flow blockage, ie, 5.2 vs 4.2 I tried the "Loss Coefficient" setting under Boundary Details in Setup, but that didn't do much. Even at 90%. Any suggestions?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to simulate Choked Flow in Orifice? (URGENT)	kaegen	FLUENT	2	July 10, 2010 18:19
solver for simulate droplet flow in microfluidics	titio	OpenFOAM Running, Solving & CFD	0	October 1, 2009 14:02
Can I simulate multicomponent flow in porous solid	galary	FLUENT	0	May 21, 2006 00:53
Can 'shock waves' occur in viscous fluid flows?	diaw	Main CFD Forum	104	February 16, 2006 05:44
How to simulate very slow flow?	Anna	FLUENT	0	July 22, 2003 23:02

All times are GMT -4. The time now is 22:59.