CFX Tutorials

haris05 · December 5, 2011, 01:21

I want to learn CFX software. Can anybody send me the basic tutorials to this software.

Thanks in advance

Far · December 5, 2011, 01:42

http://www1.ansys.com/customer/conte...0/cfx_tutr.pdf

haris05 · December 5, 2011, 01:59

Thanx Sir...

ghorrocks · December 5, 2011, 05:08

And the tutorials are installed as part of the CFX installation on your machine. Look at help and you should find them. If they are not included then you need to re-install and make sure you include them in the installation this time. If you have pirate software which does not come with tutorials then, well...... You get what you pay for, don't you?

haris05 · December 5, 2011, 05:47

i got them now in help too...thanx

Far · December 5, 2011, 11:13

Quote:

If you have pirate software which does not come with tutorials then, well...... You get what you pay for, don't you?

Oh so help/tutorials is very much expensive

ghorrocks · December 5, 2011, 17:20

I have seen several posts over the years which suggest to me that some pirate versions of CFX do not have the tutorials included. This makes me cautious about any request for the tutorials.

They are copyright material so we are not allowed to post them on the forum anyway.

Far · December 5, 2011, 23:38

but the link I have just posted in above post seems to be the official downloading page of ANSYS help in pdf format

Cluain · December 6, 2011, 05:30

The link is now coming up as a blank page.
As far as I am aware, the user needs to have an account with ANSYS to access the customer support pages, and downloads.

Far · December 6, 2011, 06:00

link is active

ghorrocks · December 6, 2011, 18:41

Yes, you need an account to access the ANSYS Community pages. I understand university students and others who are covered under their school's license agreement are eligible for an account - talk to ANSYS about this.

December 5, 2011, 01:21	CFX Tutorials	#1
haris05 New Member Haris Fareed Join Date: Mar 2010 Posts: 5 Rep Power: 16	I want to learn CFX software. Can anybody send me the basic tutorials to this software. Thanks in advance

December 5, 2011, 01:42		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	http://www1.ansys.com/customer/conte...0/cfx_tutr.pdf haris05 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX Treatment of Laminar and Turbulent Flows	Jade M	CFX	18	September 15, 2022 07:08
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 15:45
Different flow pattern between OpenFOAM and CFX	AirS	OpenFOAM	0	January 12, 2010 07:08
heat generation in CFX	Ema	CFX	4	August 7, 2009 05:39
Electronics Enclosure Analysis with CFX	Simulation Engineer	CFX	1	April 22, 2009 11:08

December 5, 2011, 01:59		#3
haris05 New Member Haris Fareed Join Date: Mar 2010 Posts: 5 Rep Power: 16	Thanx Sir...

December 5, 2011, 05:08		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	And the tutorials are installed as part of the CFX installation on your machine. Look at help and you should find them. If they are not included then you need to re-install and make sure you include them in the installation this time. If you have pirate software which does not come with tutorials then, well...... You get what you pay for, don't you?

December 5, 2011, 05:47		#5
haris05 New Member Haris Fareed Join Date: Mar 2010 Posts: 5 Rep Power: 16	i got them now in help too...thanx

December 5, 2011, 17:20		#7
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	I have seen several posts over the years which suggest to me that some pirate versions of CFX do not have the tutorials included. This makes me cautious about any request for the tutorials. They are copyright material so we are not allowed to post them on the forum anyway.

December 5, 2011, 23:38		#8
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	but the link I have just posted in above post seems to be the official downloading page of ANSYS help in pdf format

December 6, 2011, 05:30		#9
Cluain Member Join Date: Oct 2011 Posts: 32 Rep Power: 14	The link is now coming up as a blank page. As far as I am aware, the user needs to have an account with ANSYS to access the customer support pages, and downloads.

December 6, 2011, 06:00		#10
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	link is active

December 6, 2011, 18:41		#11
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Yes, you need an account to access the ANSYS Community pages. I understand university students and others who are covered under their school's license agreement are eligible for an account - talk to ANSYS about this.