CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   To determine the conical volume in channel in the POST-CFX (https://www.cfd-online.com/Forums/cfx/96171-determine-conical-volume-channel-post-cfx.html)

melika January 14, 2012 15:13
To determine the conical volume in channel in the POST-CFX
 
Hello
Currently I am doing a research on circular channel with the water depth of 0.3 m
to single-phase.
Radius is 1.5 m.
How i can separate a conical volume in the circular channel in the POST-CFX?

ghorrocks January 14, 2012 19:04
If the conical volume you refer to is the fluid volume then yes, do a volume integral of volume fraction.

melika January 14, 2012 19:41
thanks a lot

melika January 15, 2012 06:21
but how do this? i did location-volume-pyramid but it did not separate volume.

melika January 15, 2012 07:48
it did not determine volume
 
please help me:(

ghorrocks January 15, 2012 16:50
Use the function calculator and the volumeInt() function.


All times are GMT -4. The time now is 10:44.