Turbulence Model for Confined Jets

lucasphp · June 3, 2014, 19:48

Good afternoon,

I am studying the impact force produced by a jet colliding against a wall.
The distance between the eject nozzle and the wall is variable.

The study fluid is water and the Re on the nozzle is about 80000. The turbulence model chosen is the SST.

After some tests, I noticed that the SST model doesn't fit exactly with the experimental data. To explain better my question, there is a curve in the attachment (from a study about evaluation of modified two-equation turbulence models for jet flow predictions.) that compares different turbulence models on the centerline velocity of a jet.

The problem is the delay in velocity to decrease, which is generating impact force larger than the experimental data in that range.

So, the question is: Is the SST model the best turbulence model available on CFX or you, CFD experts, have a better solution for me?

Thank you,
Lucas

ghorrocks · June 4, 2014, 06:26

Have you done the basic accuracy checks? http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F

In particular have you checked the inlet and atmospheric turbulence intensity is correct?

June 3, 2014, 19:48	Turbulence Model for Confined Jets	#1
lucasphp New Member Lucas Figueiredo Join Date: Jan 2013 Posts: 8 Rep Power: 13	Good afternoon, I am studying the impact force produced by a jet colliding against a wall. The distance between the eject nozzle and the wall is variable. The study fluid is water and the Re on the nozzle is about 80000. The turbulence model chosen is the SST. After some tests, I noticed that the SST model doesn't fit exactly with the experimental data. To explain better my question, there is a curve in the attachment (from a study about evaluation of modified two-equation turbulence models for jet flow predictions.) that compares different turbulence models on the centerline velocity of a jet. The problem is the delay in velocity to decrease, which is generating impact force larger than the experimental data in that range. So, the question is: Is the SST model the best turbulence model available on CFX or you, CFD experts, have a better solution for me? Thank you, Lucas

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SimpleFoam case with SpalartAllmaras turbulence model implemented	nedved	OpenFOAM Running, Solving & CFD	2	November 30, 2014 22:43
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44
K - epsilon VS SST turbulence model	Maicol	Main CFD Forum	0	November 30, 2012 16:25
Low Reynolds k-epsilon model	YJZ	ANSYS	1	August 20, 2010 13:57
KOmega Turbulence model from wwwopenFOAMWikinet	philippose	OpenFOAM Running, Solving & CFD	30	August 4, 2010 10:26

June 4, 2014, 06:26		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Have you done the basic accuracy checks? http://www.cfd-online.com/Wiki/Ansys..._inaccurate.3F In particular have you checked the inlet and atmospheric turbulence intensity is correct?